The CNC Electric CJX2s-32 is a three-pole AC motor contactor with 32A AC-3 rating at 380/400V and built-in 1NO+1NC auxiliary contacts. This page selects a AC 380/400V 50Hz control coil and retains the exact original model photograph.
The CNC Electric CJX2s-95 is a three-pole AC motor contactor with 95A AC-3 rating at 380/400V and built-in 1NO+1NC auxiliary contacts. This page selects a AC 220/230V 50/60Hz control coil and retains the exact original model photograph.
The CNC Electric YCT8-ST is a DIN-rail time relay for star-delta timing. This listing selects the complete YCT8-ST/A230 reference with AC 230V supply, 2CO output and Star 0.1s–10min; transition 0.1s–1s timing. Original CNC model photographs and complete source catalogue are retained.
The CNC Electric YCBZ-40 is a manually operated changeover switch-disconnector with I-0-II positions. This page covers the original photographed two-pole 40A version, marked 230/400V AC, 50/60Hz and AC-22A. Its centre OFF position separates the two source selections during manual changeover.
The CNC Electric YCT8-M2/A230 is a multifunction DIN-rail time relay with ten selectable functions and two changeover contacts. The original photographed unit is marked AC230V, 50/60Hz. Its two AC-1 outputs are each rated 16A; the setting range is 0.1 seconds to 10 days.
The CNC Electric YCQ4-100R/2P is a 100A, two-pole PC-class automatic transfer switch for selecting between a normal AC supply and a standby supply. This page covers the original photographed 220V AC version, with automatic/manual operation and right-side power-terminal arrangement.
The CNC Electric YCQR-63 is a compact PC-class automatic transfer switch with two source positions, normal supply A and standby supply B. The version shown here is the original two-pole 63A unit, marked 230V AC for the power circuit and AC220V for the control circuit.
The CNC Electric YCL8-02 monitors conductive liquid levels in wells, reservoirs and tanks. This original YCL8-02 version provides selectable one-level or two-level, pump-up / pump-down, AC/DC24–240V isolated supply and a 10A AC-1 changeover output.
The CNC Electric YCT8-2T is a DIN-rail time relay for two independent on-delays. This listing selects the complete YCT8-2T/A230 reference with AC 230V supply, 2CO output and 0.1s–10 days timing. Original CNC model photographs and complete source catalogue are retained.
The CNC Electric YCB9LE-80M is an electronic residual-current circuit breaker with overcurrent protection. This listing covers the original photographed C20 version: 20A, two-pole L+N arrangement, 230V AC 50Hz, 30mA Type AC residual-current protection and 6kA rated short-circuit capacity.
The CNC Electric XJ3-D monitors a three-phase AC380V supply for overvoltage, undervoltage, phase failure and phase sequence error, opening its changeover control contact to release an external contactor.
The CNC Electric YCT8-D is a DIN-rail time relay for off-delay after supply removal. This listing selects the complete YCT8-D/W240 reference with AC/DC 12–240V supply, 1CO output and 0.1s–10 minutes timing. Original CNC model photographs and complete source catalogue are retained.