The original NLQ4 page identifies a special PV-system-to-city-power transfer application and supplies the associated AC system references and diagrams.
The W2R overview describes DIN-rail automatic and manual transfer between normal and standby AC supplies. Specify the complete current, pole and controller configuration.
4P100A PV/inverter-to-grid ATS, L+N220–230V control, manual/automatic modes and <50ms transfer reference. Inverter/PV to source A, stable utility to source B; B must remain powered for this PV type.
4P125A PC-class DIN-rail ATS for utility and generator sources, AC220–230V L+N control reference, manual/automatic modes and <8ms transfer reference. Not the PV/inverter version.
Two AC 220V single-phase sources to one L-N load. Adjustable L1/L2/AUTO priority, voltage and overcurrent protection; 63A AC-1. N1 and N2 are internally connected.
Three-phase four-wire input to one single-phase L-N load. Adjustable L1/L2/L3/AUTO priority, voltage and overcurrent protection; 63A AC-1. This is not a three-phase load output.
2P63A PC-class DIN-rail ATS for L+N110–120V50/60Hz systems. Utility/generator source arrangement, manual/automatic modes and <50ms switching reference. The 230V and PV versions are separate variants.
4P250A AC400V automatic transfer switch with normal-source priority, manual/automatic modes and two inputs/one output. Supply is interrupted during transfer; written switching-time reference <2.5s. Does not start or stop a generator.