CNC Electric · YCQR-63
Product overview
The CNC Electric YCQR-63 is a compact PC-class automatic transfer switch with two source positions, normal supply A and standby supply B. The version shown here is the original two-pole 63A unit, marked 230V AC for the power circuit and AC220V for the control circuit.
Technical selection summary
| Manufacturer model | YCQR-63 |
|---|---|
| Published configuration | 2P, 63A |
| Rated working voltage Ue | 230V AC, original 2P product nameplate |
| Rated control voltage Us | AC220V; catalogue working range 85–110% Us |
| Rated frequency | 50/60Hz on the power-circuit nameplate; catalogue control circuit 50Hz |
| Rated insulation voltage Ui | 690V AC |
| Rated impulse withstand voltage Uimp | 8kV |
| Equipment / utilization category | PC class / AC-31B |
| Transfer / return / power-off time | <50ms, manufacturer technical table |
| Conditional short-circuit current Iq | 50kA only with the specified RT16-00/63A fuse coordination; not an interrupting rating |
| Mechanical / electrical life | ≥8,000 / ≥1,500 operations |
| Operation | Automatic or manual source changeover |
| Installation | DIN rail; original dimension drawing below |
| Product marking | IEC 60947-6; manufacturer catalogue identifies the ATS family |
Selection and installation
The factory 2P photograph identifies Ue 230V AC separately from control voltage AC220V. The older shared catalogue lists 220V/110V working-voltage selections; its 110V selection is not offered here. This page does not offer the separately photographed 4P 400V unit. Follow the original source I, source II and LOAD terminal labels. Transfer interrupts the supply briefly and is not UPS operation. Provide correctly coordinated upstream overload and short-circuit protection; the PC-class switch cannot replace a circuit breaker. The shared catalogue dimension figure depicts the wider 4P body; do not use its width as a 2P installation dimension.
Typical applications
Compact single-phase mains/standby transfer panels, including compatible generator or inverter backup installations designed by a qualified installer.
Original technical data and drawings
The following manufacturer figures retain the original technical content. Dimensions are in millimetres unless otherwise marked. Refer to the model and frame labels when using a shared family drawing.




