CNC Electric · YCT8-D
Product overview
The CNC Electric YCT8-D is a DIN-rail time relay for off-delay after supply removal. This listing selects the complete YCT8-D/W240 reference with AC/DC 12–240V supply, 1CO output and 0.1s–10 minutes timing. Original CNC model photographs and complete source catalogue are retained.
Technical selection summary
| Complete selected order reference | YCT8-D/W240 |
|---|---|
| Function | Off-delay after supply removal |
| Supply / frequency | AC/DC 12–240V; 50/60Hz for AC |
| Time range | 0.1s–10 minutes |
| Output contacts | 1CO (changeover) |
| Rated contact current | 16A per changeover, AC-1 |
| Minimum pre-energization | 3 seconds |
| Power terminals | A1–A2 |
| Supply tolerance | −15% / +10% |
| Time setting / repeat accuracy | Rotary setting and fine potentiometer; 0.2% setting stability |
| Switching voltage | 250V AC / 24V DC |
| Operating ambient | −20°C to +55°C |
| Protection | IP40 front panel / IP20 terminals |
| Mounting / dimensions | 35mm EN/IEC 60715 DIN rail; 90 × 18 × 64mm |
| Conductor capacity | Solid: 1 × 2.5 or 2 × 1.5mm²; sleeved: 1 × 2.5mm² |
| Standards referenced | EN 61812-1; IEC 60947-5-1 |
Selection and installation
This page is YCT8-D/W240, AC/DC 12–240V, 1CO. The original front photograph identifies YCT8-D; supply suffix W240 is selected from the manufacturer ordering chart, not inferred from an unreadable side label. Do not substitute another functional suffix or supply version. Minimum pre-energization is 3 seconds; timing reserve holds the relay function and does not power the load. Output ratings are AC-1 contact ratings, not motor-starting capacity. Use coordinated external contactors and overload/short-circuit protection for motor circuits.
Typical applications
Panel control timing for compatible lighting, ventilation, pump-control and motor-contactor circuits; follow the exact timing and wiring diagram.
Original technical data and drawings
The following manufacturer figures retain the original technical content. Dimensions are in millimetres unless otherwise marked. Refer to the model and frame labels when using a shared family drawing.




