Product overview
The Suntree SUP2H1-PV is a three-pole, plug-in Type 2 DC surge protection device for photovoltaic equipment. This listing covers the 1000 V DC version.
Technical specifications
| Model | SUP2H1-PV |
|---|---|
| Type | Type 2 DC SPD |
| Poles | 3P |
| Maximum continuous operating voltage Uc | 1000 V DC |
| Nominal discharge current In | 20 kA |
| Maximum discharge current Imax (8/20 µs) | 40 kA |
| Voltage protection level Up | 3.6 kV |
| Service temperature | −40 to +70 °C |
| Relative humidity | ≤95% at 25 °C |
| Installation | 35 mm DIN rail |
| Status indicator | Green: normal; red: replace |
| Ingress protection | IP20 |
| Leakage current at 0.75 U₁ₘₐ | ≤20 µA |
Features and installation
Vent openings help dissipate heat and plug-in clips simplify module replacement. A flash barrier limits arc propagation. A combined disconnect and an electrically isolated shunting device help mitigate DC arc damage. The visual indicator and optional floating changeover contact support status monitoring. Maintain at least 10 mm clearance between the PV SPD and other grounded parts in the housing using suitable insulation.



