Type 2 PV DC surge protection
Product overview
The UP2-PV is a three-pole Type 2 surge protective device for photovoltaic DC systems, with a maximum continuous operating voltage of 1500 V DC. Plug-in modules, a green/red status window and optional remote signaling support inspection and maintenance.
Specifications on this page apply to the 1500 V DC version. Product images illustrate the series design.
Technical specifications
| Product model | UP2-PV |
|---|---|
| Maximum continuous operating voltage Uc | 1500 V DC |
| Maximum discharge current Imax (8/20 µs) | 40 kA |
| Voltage protection level Up | 5.0 kV |
| Service temperature | −40°C to +70°C |
| Relative humidity | ≤95% at 25°C |
| Installation | 35 mm standard DIN rail |
| Window indication | Normal: green; Failure: red |
| Ingress protection | IP20 |
| Number of poles | 3P |
| Leakage at 0.75 U1mA (µA) | ≤20 |
Features and installation
- Heat-dissipation openings help reduce the operating temperature.
- Single-chip voltage up to 750 V.
- Plug-in clips allow easy module replacement.
- A flash barrier helps prevent arc propagation during current impulses.
- Use a suitable electrical insulator to maintain a minimum safety distance of 10 mm between the PV SPD and other grounded parts in the enclosure.
- Green and red indicator flags show the protective status: green for normal operation and red when replacement is required.
- Visual indication and optional remote signaling through a floating changeover contact.
- Combined disconnection function.
- A short-circuiting (shunting) device with safe electrical isolation helps prevent fire damage from DC arcs.



