CHINT · Foot-operated control switch
Product overview
The CHINT YBLT-3 and YBLT-4 are cast-aluminium foot switches for machine-control circuits. Select the required mechanical model and use the contact rating for the actual AC or DC utilization category.
Technical selection summary
| Models | YBLT-3 and YBLT-4; use the corresponding outline drawing |
|---|---|
| Contact arrangement | One changeover contact: COM / NO / NC, according to the catalogue diagram |
| AC control duty | AC-15: 380 V, 0.79 A; 50 Hz |
| DC control duty | DC-13: 220 V, 0.14 A |
| Conventional thermal current | 3 A; not the rated switching current at every voltage |
| Enclosure material / protection | Cast aluminium alloy; IP31 in the 2026 manufacturer catalogue |
| Rated insulation voltage | 415 V |
| Rated impulse withstand voltage | 4 kV |
| Installation / pollution category | Installation category II; pollution degree 3 |
| Operating frequency | 20 operations per minute |
| Ambient temperature / altitude | −5 to +40 °C; altitude ≤2000 m |
| Standards reference | GB/T 14048.5 and IEC 60947-5-1 |
Do not treat the 3 A thermal rating as AC-15 or DC-13 switching capacity. The manufacturer advises against prolonged depression, excessively slow/fast operation and very small loads; consult the manufacturer for operation below 100 V. Use the selected model’s dimensions and provide a suitable installation environment.
Typical applications
- Foot-operated machine-tool control circuits
- Hands-free control input within the verified contact duty
CHINT YBLT-3 / YBLT-4 official catalogue and downloads


