CHINT TND1 Single Phase SVC Automatic Voltage Regulator Stabilizer

Name: CHINT TND1 Single Phase SVC Automatic Voltage Regulator Stabilizer
Brand: CHINT
SKU: 1600757716429

Brand Name:Chint
Place of Origin:China
Use:SVC
Model Number:TND1
Current Type:AC
Phase:Single Phase

Output Power

Input Voltage

Output Voltage

SKU: 1600757716429 Category: Others

Description

Chint TND1 Single phase SVC TND1-5 TND1-3 TND1-2 TND1-1 TND1-0.5 TND1-1.5 TND1-10/AF CHNT Automatic Voltage Regulator Stabilizer

1.1 Application:
Chint TND1/TNS1 series full-automatic AC voltage regulator collects sample and amplifies it and automaticly control circuit, and drives the servomotor to rotate the rocker arm and brush in required direction, and finally adjusts the output voltage to the rated value,
finally reaches the aim of stabilizing the voltage. It can be widely used in areas, where the mains voltage often comes across sharp
fluctuation or sharp seasonal variation, such as industrial production, scientific research medical treatment & hygiene, household electrical appliances, it can provide any loads with excellent power supply.

1.2 Features:

Elegant appearance, compact structure, light weight, low power waste,
complete protection functions, stable and reliable, low output waveform distortion and so on.

Additional information

Weight	2 kg
Dimensions	25 × 25 × 25 cm
Output Power	0.5kVA, 1kVA, 1.5kVA, 2kVA, 3kVA, 5kVA, 10kVA, 15kVA, 20kVA, 30kVA
Input Voltage	160V~250V, 130V~230V
Output Voltage	220V±4%

Technical Datasheet & Downloads

📄 Technical Documentation & Product Specifications

Download official engineering datasheets, certified test standards (IEC / UL / CE), wiring diagrams, and dimensional drawings for CHINT TND1 Single Phase SVC Automatic Voltage Regulator Stabilizer.

📥

Official Technical Datasheet (PDF) Complete electrical ratings, tripping characteristics, dimensions, and compliance specifications.

📐

2D/3D CAD & Dimensional Drawings STEP, DXF, and PDF CAD drawing files for panel builders and switchgear designers.

Technical FAQ & Selection Guide

💡 Frequently Asked Technical Questions & Selection Guide

Pure engineering specifications, tripping curve parameters, and electrical selection guidance for panel builders and system designers.

Voltage & Load Sizing

How to verify rated operational voltage, frequency, and load duty cycle?

Verify that the nominal line voltage (AC 230V single-phase or 400V/415V/690V three-phase at 50/60Hz, or DC voltage ratings) falls within the continuous maximum operating limits of the device. Check duty cycle ratings (continuous vs intermittent duty) to ensure thermal stability under full load.

Protection & Environment

What ingress protection (IP Rating) and environmental enclosures are recommended?

For clean indoor electrical rooms, standard IP20 modular DIN-rail housings are recommended. For outdoor, industrial washdown, or dusty environments, mount components inside weatherproof enclosures rated IP65/IP66 with UV-resistant polycarbonate or powder-coated steel enclosures equipped with compression cable glands.

Selectivity & Grading

How to ensure upstream and downstream coordination in power distribution boards?

Ensure proper discrimination by grading current thresholds and tripping time delays: upstream devices should have higher current ratings and intentional short-time delays (Class S), allowing downstream branch MCBs to clear localized faults without blacking out the entire facility.

Installation & Mounting

What mounting rails, busbars, and spatial clearances are required?

Components mount on standard symmetrical 35mm DIN rail (EN 60715 / TH35-7.5) or backplate screw fixings. Maintain recommended top/bottom ventilation gaps (typically 30–50mm) to ensure unrestricted air convection, and use standard pin/fork comb busbars to minimize contact resistance and wiring errors.

Conductor & Torque Sizing

What conductor sizes and terminal tightening torques should be applied?

Select copper or aluminum conductor cross-sections complying with IEC 60364-5-52 current-carrying capacity tables based on continuous load. Always use a calibrated torque screwdriver or torque wrench to tighten terminal screws to the manufacturer-specified torque to prevent hot-spot degradation and loose connections.