The CNC Electric CJX2-D2510 is a three-pole AC contactor for switching and controlling AC motor circuits. Its AC-3 operating current is 25A at 380V. This page retains the original D2510 marking and covers the AC220V 50/60Hz control-coil configuration, with 1NO built-in auxiliary contacts.
The CNC Electric YCT8-ST is a DIN-rail time relay for star-delta timing. This listing selects the complete YCT8-ST/A230 reference with AC 230V supply, 2CO output and Star 0.1s–10min; transition 0.1s–1s timing. Original CNC model photographs and complete source catalogue are retained.
The CNC Electric RT18PV-32 is a single-pole photovoltaic fuse holder for a 10×38mm cylindrical fuse link. The original unit is marked 32A and 1000V DC. This page covers the fuse holder; select a separately rated gPV fuse link for the actual PV string.
The CNC Electric YCB9-80H is a high-capacity thermal-magnetic miniature circuit breaker. This page covers the original four-pole C63 sample documented in the manufacturer CB report: 63A, 400/415V AC, 50/60Hz and 10kA under IEC/EN 60898-1. The original H marking and product photographs are retained.
The CNC Electric XJ3-D monitors a three-phase AC380V supply for overvoltage, undervoltage, phase failure and phase sequence error, opening its changeover control contact to release an external contactor.
The CNC Electric YCQ4-100R/2P is a 100A, two-pole PC-class automatic transfer switch for selecting between a normal AC supply and a standby supply. This page covers the original photographed 220V AC version, with automatic/manual operation and right-side power-terminal arrangement.
The CNC Electric YCQR-63 is a compact PC-class automatic transfer switch with two source positions, normal supply A and standby supply B. The version shown here is the original two-pole 63A unit, marked 230V AC for the power circuit and AC220V for the control circuit.
The CNC Electric YCB9LE-80M is an electronic residual-current circuit breaker with overcurrent protection. This listing covers the original photographed C20 version: 20A, two-pole L+N arrangement, 230V AC 50Hz, 30mA Type AC residual-current protection and 6kA rated short-circuit capacity.
The CNC Electric CJX2-D4011 is a three-pole AC contactor for switching and controlling AC motor circuits. Its AC-3 operating current is 40A at 380V. This page retains the original D4011 marking and covers the AC220V 50/60Hz control-coil configuration, with 1NO+1NC built-in auxiliary contacts.
The CNC Electric SUL181h is a quartz-controlled analogue daily time switch with 48 switching segments and a 30-minute minimum setting interval. This original photographed version is marked 110–230V AC and R150h, with a 16(4)A contact marking at 250V AC.
The CNC Electric YCT8-D is a DIN-rail time relay for off-delay after supply removal. This listing selects the complete YCT8-D/W240 reference with AC/DC 12–240V supply, 1CO output and 0.1s–10 minutes timing. Original CNC model photographs and complete source catalogue are retained.
The CNC Electric JR28s-25 thermal overload relay protects compatible AC motor circuits against overload and phase failure. This listing retains the original 17–25A dial and covers the complete original-shop reference JR28s-25-17-25A.