Showing 1297–1308 of 1333 results

CNC Electric YCQR2-045 Soft Starter, 45kW 380V 80A

The YCQR2-045 soft starter provides controlled starting and stopping of a compatible 45kW three-phase AC squirrel-cage motor. Microprocessor-controlled thyristors limit starting current or ramp the applied voltage, then transfer operation to a bypass contactor.

CNC Electric YCB9RL-100 RCCB 2P 63A 30mA Type AC 230V

The CNC Electric YCB9RL-100 is an electromagnetic residual-current circuit breaker without integral overcurrent protection. This page covers the original two-pole 63A, 230V AC, 30mA Type AC unit. Its 10,000A marking is a conditional short-circuit rating, not an MCB interrupting rating.

ABB MS132-20 Manual Motor Starter, 16-20A, 1SAM350000R1013

The ABB MS132-20 manual motor starter combines manual switching, thermal overload and electromagnetic short-circuit protection for the adjustable current range 16-20A. The exact ABB ordering reference is 1SAM350000R1013. It has trip class 10.

CNC Electric YCT8-M2/A230 Multifunction Time Relay 2CO 16A AC230V

The CNC Electric YCT8-M2/A230 is a multifunction DIN-rail time relay with ten selectable functions and two changeover contacts. The original photographed unit is marked AC230V, 50/60Hz. Its two AC-1 outputs are each rated 16A; the setting range is 0.1 seconds to 10 days.

ABB PSR45-600-70 Softstarter, 22kW 400V, 45A, 1SFA896111R7000

The ABB PSR45-600-70 softstarter is rated 45A IEC and 22kW at 400V for normal in-line starting duty. It operates on a three-phase 208-600V AC supply with 100-240V AC control power and built-in bypass. ABB ordering reference: 1SFA896111R7000.

CNC Electric CJX2s-25 25A AC Contactor 3P 1NO+1NC

The CNC Electric CJX2s-25 is a three-pole AC motor contactor with 25A AC-3 rating at 380/400V and built-in 1NO+1NC auxiliary contacts. This page selects a AC 380/400V 50Hz control coil and retains the exact original model photograph.

ABB PSTX30-600-70 Softstarter, 15kW 400V, 30A, 1SFA898103R7000

The ABB PSTX30-600-70 softstarter is rated 30A IEC and 15kW at 400V for normal in-line starting duty. It operates on a three-phase 208-600V AC supply with 100-250V AC control power and built-in bypass. ABB ordering reference: 1SFA898103R7000.

CNC Electric YCX8-IFS Solar Combiner Box, DC1000V IP65

The YCX8-IFS photovoltaic combiner box houses DC-side protection and isolation between PV strings and compatible inverter inputs. The original technical table lists 1-input/1-output and 6-input/2-output enclosures with a maximum DC1000V operating voltage.

ABB TF42-13 Thermal Overload Relay, 10-13A, 1SAZ721201R1045

The ABB TF42-13 thermal overload relay provides motor overload and phase-loss protection for the adjustable current range 10-13A. The exact ABB ordering reference is 1SAZ721201R1045. It has trip class 10.

CNC Electric YCB9-80M 3P C63 MCB 6kA 400V AC

The CNC Electric YCB9-80M is a thermal-magnetic miniature circuit breaker for overload and short-circuit protection of AC distribution circuits. This page covers the original photographed three-pole C63 configuration: 63A, 400V AC, 50Hz and 6kA under IEC 60898-1. The M version is kept separate from the 10kA H version.

CNC Electric YCS6-C40 DC Surge Protector, 2P 1000V 20/40kA

The CNC Electric YCS6-C40 is a pluggable DC surge protective device for photovoltaic DC circuits. This listing covers the 2-pole, DC 1000V version with a nominal discharge current of 20kA and maximum discharge current of 40kA (8/20 microseconds). The original module is marked YCS6-C; YCS6-C40 is the complete type in the manufacturer selection table.

ABB PSR16-600-70 Softstarter, 7.5kW 400V, 16A, 1SFA896107R7000

The ABB PSR16-600-70 softstarter is rated 16A IEC and 7.5kW at 400V for normal in-line starting duty. It operates on a three-phase 208-600V AC supply with 100-240V AC control power and built-in bypass. ABB ordering reference: 1SFA896107R7000.