10x38mm 1A-30A DC Solar PV Electrical Removable Fuse Link

Name: 10x38mm 1A-30A DC Solar PV Electrical Removable Fuse Link
Brand: Newtrend or OEM
SKU: 1770401066756612096

Brand Name:Newtrend or OEM
Place of Origin:China
Use:LOW VOLTAGE
Safety Standards:IEC
Breaking Capacity:High
Voltage:DC 1000V, 1500V
Rated current:1A 2A 4A 6A 8A 10A 12A 16A 20A 25A 32A

Rated Current (A)

Rated Voltage (DC)

SKU: 1770401066756612096 Category: Others

Description

10x38mm Solar DC Fuses and Fuse Holders are mainly used in DC circuit, rated voltage up to 1000V, 1500V, rated current up to 32A, for circuit protection against overload and short circuit (type gG), also available for protection of semiconductor parts and equipment against short circuit (type aR), protection of motor (type aM). Compliant with IEC 60269 standard.

Features:

Variable cross section fuse element made from pure metal sealed in cartridge made from high duty ceramic. Fuse tube filled with chemically treated high-purity quartz sand as arc-extinguishing medium. Dot-welding of fuse element ends to the caps ensures reliable electric connection.

Model Number	10×38 DC Solar Fuse
Voltage	Up to 1000Vdc
Current	1A 2A 4A 6A 8A 10A 12A 16A 20A 25A 32A
Breaking Capacity	20kA
Time constant	1-3ms
Operating class	IEC60269-6 gPV class UL UL® Listed to 248-19, Guide JFGA,
Dimension

Additional information

Rated Current (A)	1A, 2A, 3A, 4A, 6A, 8A, 10A, 12A, 15A, 16A, 20A, 25A, 30A, 32A
Rated Voltage (DC)	500V DC, 1000V DC, 1500V DC

Technical Datasheet & Downloads

📄 Technical Documentation & Product Specifications

Download official engineering datasheets, certified test standards (IEC / UL / CE), wiring diagrams, and dimensional drawings for 10x38mm 1A-30A DC Solar PV Electrical Removable Fuse Link.

📥

Official Technical Datasheet (PDF) Complete electrical ratings, tripping characteristics, dimensions, and compliance specifications.

📐

2D/3D CAD & Dimensional Drawings STEP, DXF, and PDF CAD drawing files for panel builders and switchgear designers.

Technical FAQ & Selection Guide

💡 Frequently Asked Technical Questions & Selection Guide

Pure engineering specifications, tripping curve parameters, and electrical selection guidance for panel builders and system designers.

Voltage & Load Sizing

How to verify rated operational voltage, frequency, and load duty cycle?

Verify that the nominal line voltage (AC 230V single-phase or 400V/415V/690V three-phase at 50/60Hz, or DC voltage ratings) falls within the continuous maximum operating limits of the device. Check duty cycle ratings (continuous vs intermittent duty) to ensure thermal stability under full load.

Protection & Environment

What ingress protection (IP Rating) and environmental enclosures are recommended?

For clean indoor electrical rooms, standard IP20 modular DIN-rail housings are recommended. For outdoor, industrial washdown, or dusty environments, mount components inside weatherproof enclosures rated IP65/IP66 with UV-resistant polycarbonate or powder-coated steel enclosures equipped with compression cable glands.

Selectivity & Grading

How to ensure upstream and downstream coordination in power distribution boards?

Ensure proper discrimination by grading current thresholds and tripping time delays: upstream devices should have higher current ratings and intentional short-time delays (Class S), allowing downstream branch MCBs to clear localized faults without blacking out the entire facility.

Installation & Mounting

What mounting rails, busbars, and spatial clearances are required?

Components mount on standard symmetrical 35mm DIN rail (EN 60715 / TH35-7.5) or backplate screw fixings. Maintain recommended top/bottom ventilation gaps (typically 30–50mm) to ensure unrestricted air convection, and use standard pin/fork comb busbars to minimize contact resistance and wiring errors.

Conductor & Torque Sizing

What conductor sizes and terminal tightening torques should be applied?

Select copper or aluminum conductor cross-sections complying with IEC 60364-5-52 current-carrying capacity tables based on continuous load. Always use a calibrated torque screwdriver or torque wrench to tighten terminal screws to the manufacturer-specified torque to prevent hot-spot degradation and loose connections.