Albright DC66P Equivalent DC Reversing Winch Solenoid 200A/250A

Name: Albright DC66P Equivalent DC Reversing Winch Solenoid 200A/250A
Brand: Albright
SKU: 60082982552

Electricity Type:DC
Brand Name:Newtrend or OEM
Application:Industrial Automation
Place of Origin:China
Province:Zhejiang
Model Number:DC66P
Mounting Type:FREE STANDING
Phase:1
Main Circuit Rating Current:Continuous 50A Intermittent 200A

Number of Pole

Main Circuit Rating Voltage

SKU: 60082982552 Category: Others

Description

Albright DC66P replacement Intermittent 200A 250A 12 Volt 24 Volt DC Relay Winch Motor Reversing Solenoid Switch

Continuous 50A, Intermittent 200A, Overload 200A

DC Coil: 12V 24V 36V 48V 60V 110V 220V

suitable for Winches, Tarp Motor, Chargers, Batteries, Electric Vehicles etc.

Application:

The product has two sets of contact switch and could be used for auto electric winch, telecommunication equipments, engineering machinery, storage battery, electric forklift trucks, trains, ships, uninterruptible power supply, electric control system, etc.

Additional information

Weight	0.7 kg
Dimensions	10 × 10 × 10 cm
Number of Pole	Single Pole Double Throw for Motor Reversing
Main Circuit Rating Voltage	12VDC, 24VDC

Technical Datasheet & Downloads

📄 Technical Documentation & Product Specifications

Download official engineering datasheets, certified test standards (IEC / UL / CE), wiring diagrams, and dimensional drawings for Albright DC66P Equivalent DC Reversing Winch Solenoid 200A/250A.

📥

Official Technical Datasheet (PDF) Complete electrical ratings, tripping characteristics, dimensions, and compliance specifications.

📐

2D/3D CAD & Dimensional Drawings STEP, DXF, and PDF CAD drawing files for panel builders and switchgear designers.

Technical FAQ & Selection Guide

💡 Frequently Asked Technical Questions & Selection Guide

Pure engineering specifications, tripping curve parameters, and electrical selection guidance for panel builders and system designers.

Voltage & Load Sizing

How to verify rated operational voltage, frequency, and load duty cycle?

Verify that the nominal line voltage (AC 230V single-phase or 400V/415V/690V three-phase at 50/60Hz, or DC voltage ratings) falls within the continuous maximum operating limits of the device. Check duty cycle ratings (continuous vs intermittent duty) to ensure thermal stability under full load.

Protection & Environment

What ingress protection (IP Rating) and environmental enclosures are recommended?

For clean indoor electrical rooms, standard IP20 modular DIN-rail housings are recommended. For outdoor, industrial washdown, or dusty environments, mount components inside weatherproof enclosures rated IP65/IP66 with UV-resistant polycarbonate or powder-coated steel enclosures equipped with compression cable glands.

Selectivity & Grading

How to ensure upstream and downstream coordination in power distribution boards?

Ensure proper discrimination by grading current thresholds and tripping time delays: upstream devices should have higher current ratings and intentional short-time delays (Class S), allowing downstream branch MCBs to clear localized faults without blacking out the entire facility.

Installation & Mounting

What mounting rails, busbars, and spatial clearances are required?

Components mount on standard symmetrical 35mm DIN rail (EN 60715 / TH35-7.5) or backplate screw fixings. Maintain recommended top/bottom ventilation gaps (typically 30–50mm) to ensure unrestricted air convection, and use standard pin/fork comb busbars to minimize contact resistance and wiring errors.

Conductor & Torque Sizing

What conductor sizes and terminal tightening torques should be applied?

Select copper or aluminum conductor cross-sections complying with IEC 60364-5-52 current-carrying capacity tables based on continuous load. Always use a calibrated torque screwdriver or torque wrench to tighten terminal screws to the manufacturer-specified torque to prevent hot-spot degradation and loose connections.