CHINT NCK5 HVACR Definite Purpose Contactor, 20–40 A Codes

NCK5 switches HVACR loads under AC-8a or AC-1 duty. This selection covers the documented 20/25/30/32/40 current-code group. Model current code, FLA, resistive current and locked-rotor current are separate quantities; choose by the actual duty table.

CHINT CJ20 3P AC Contactor, 10–630A

CHINT CJ20 three-pole AC contactor. Choose the AC-3 current and an available AC control-coil voltage; the model hint follows the exact ordinary CJ20 order record.

CHINT CJ40 AC Contactor, 63–1000 A

CHINT CJ40 switches industrial motor circuits. Ordinary, JZ and J energy-saving versions have different frame and coil requirements, so choose a complete manufacturer reference.

CHINT NR2 Thermal Overload Relay, 0.1–150 A

NR2 provides inverse-time overload and phase-loss protection for motors. Its adjustable setting range must include the motor rated current, while the relay frame must match the contactor or independent mounting base. It does not replace upstream short-circuit protection.

CHINT NXR Thermal Overload Relay

CHINT NXR relays provide motor overload and phase-loss protection. The correct setting range must contain the motor nameplate current, and the relay mounting arrangement must match the contactor or separate-mounting requirement.

CHINT NQ2 Enclosed Direct Online Motor Starter

NQ2 combines contactor switching with a starter enclosure and model-specific controls. Choose the motor current and starter arrangement before choosing a power code. The NB reversing version is supplied without a thermal overload relay and requires separately coordinated protection.

CHINT NRE8 Electronic Overload Relay, Catalogue 25/40/100 Frames

CHINT NRE8 provides electronic motor overload and phase-failure protection. This page covers the NRE8-25, NRE8-40 and NRE8-100 setting ranges explicitly listed in the English NC1 assembly table.

CHINT NS2 Manual Motor Starter and Protection Circuit Breaker

CHINT NS2 manual motor starters provide motor switching with thermal overload and short-circuit protection. Select a current adjustment range that contains the motor nameplate current, then verify breaking capacity at the actual system voltage. NS2 is not an enclosed contactor-and-relay DOL assembly.

CHINT NC8 AC Contactor, 9–100 A

This CHINT NC8 listing covers the standard 9–100 A contactor range. Specify main contacts and motor duty, then select an AC, DC or wide-voltage control coil. Coil suffix and frequency must be retained in the full order code.

CHINT NC6 Mini AC Contactor, 6–9 A

CHINT NC6 mini contactors switch small motor and control circuits. Select the main and auxiliary contacts, AC-3 current at the operating voltage and exact control-coil voltage independently.

CHINT NKB1 Control and Protective Switching Device

NKB1 combines circuit switching, contactor control and coordinated protection in a modular CPS assembly. Choose the frame, rated operational current, load type and trip unit together. Optional leakage, fire-fighting and communication functions require their own versions.

CHINT NQ3 Enclosed DOL Motor Starter, up to 11 kW

CHINT NQ3 starters provide direct starting and stopping with overload and phase-failure protection. The linked catalogue covers control power up to 11 kW at 380/400 V; select the overload relay by motor current and specify the coil voltage independently.