Showing 1–12 of 29 results

CHINT NQ3-11P DOL Motor Starter, 22 A at 400 V, AC36V Coil

This NQ3-11P selection is for 22 A AC-3 service at 380/400 V with an AC 36 V control coil. The catalogue pairs it with an NC1-3210 contactor and NR2-25 overload relay in the 17–25 A setting range.

CHINT NC1 AC Contactor for Motor Control

CHINT NC1 contactors provide remote making and breaking of motor circuits. Choose the AC-3 rating at the operating voltage and confirm the coil supply before combining it with a matched overload relay.

CHINT NXC AC Contactor for Motor Control

CHINT NXC contactors switch AC motor circuits and can be combined with matched overload relays to form motor starters. Select the contact configuration and control-coil supply independently from the main-circuit duty rating.

CHINT NC2 Single-Unit AC Contactor, 115–800 A

CHINT NC2 single-unit contactors switch industrial motor circuits. The selectable AC/DC coil combinations follow the manufacturer ordering entries for the selected contacts and current. Specify reversing Ns/Nc assemblies separately.

Browse CHINT NC2 ordering codes · Find 3P codes by model and coil voltage

CHINT NCH8 DIN Rail Modular Contactor, 20–63 A

CHINT NCH8 modular contactors provide remote switching for building-service circuits. The 20–63 A designation is an AC-7a rating: motor and other inductive loads require the separate AC-7b or AC-3 rating in the catalogue.

CHINT CJ19 Capacitor-Switching Contactor

CHINT CJ19 switches capacitor banks for reactive power compensation. Select the complete contactor and coil reference rather than combining arbitrary capacitor and coil options.

CHINT CJX1-K Vacuum Contactor, 225–820 A

CHINT CJX1-K vacuum contactors switch industrial power and motor circuits. Select the complete contactor reference and its control voltage.

Chint NC1 4P 4NO Contactor

Electricity Type:AC
Brand Name:Chint
Place of Origin:China
Model Number:NC1
Phase:3
Main Circuit Rating Current:9A - 95A

CHINT NC2 4-Pole AC Contactor, 115–630 A

CHINT NC2 /4 contactors provide four-pole switching with an AC-operated coil. The shown complete references are the standard /4 versions supported by the English technical table and exact manufacturer records.

Browse CHINT NC2 ordering codes · Find 4P codes by model and coil voltage

Chint NC1 4P 2NO+2NC Contactor

Electricity Type:AC
Brand Name:Chint
Place of Origin:China
Model Number:NC1
Phase:3
Main Circuit Rating Current:9A - 95A

CHINT NC1 4-Pole DC-Coil Contactor, 25–40 A

CHINT NC1-2504Z and NC1-4004Z are four-normally-open-pole contactors for AC power circuits with DC-operated coils. Select a complete manufacturer reference; DC coil supply does not make this a DC load-switching contactor.

CHINT NCK3 Definite Purpose Contactor for HVACR

CHINT NCK3 contactors are used for HVACR switching under AC-8a/AC-1 duties. Select the published current specification, main poles and an available coil combination; full-load and locked-rotor ratings must be checked at the actual voltage.

Chint contactor and overload relay products are suitable for motor control, switching and equipment protection in industrial automation and low voltage control systems. This category is designed for panel builders, OEM manufacturers, distributors and project buyers who need branded CHINT motor control components for repeat purchasing and project support.

Main Product Types in This Category

  • CHINT contactors for motor switching and control
  • CHINT overload relays for motor protection and coordination
  • Branded motor control products for industrial panels and equipment

Typical Applications

  • Motor starters and industrial control panels
  • OEM machine building and equipment control
  • Distributor stock and project-based motor control procurement

How to Choose the Right Chint Contactor or Overload Relay

  • Confirm motor rating, coil voltage and switching requirement.
  • Check overload relay matching and panel installation condition.
  • Verify whether the order is for stock supply, project or OEM assembly.

Related Products

Frequently Asked Questions

Can contactors and overload relays be sourced together in one RFQ?

Yes. Buyers often source matching CHINT contactors and overload relays together for motor control projects.

Is this category suitable for OEM and industrial panel buyers?

Yes. These products are commonly used in OEM equipment, industrial control cabinets and panel building projects.

Need a Quote or Product Recommendation?

Send motor data, coil voltage, relay requirement and quantity so we can match the right CHINT motor control products.