CNC Electric · KG316T
Product overview
The CNC Electric KG316T is a digital time switch for automatically switching compatible electrical circuits at preset times. This original AC220V, 50/60Hz version provides 16 ON and 16 OFF settings, with AC-15 contact duty of 3A at AC220V.
Technical selection summary
| Manufacturer model | KG316T, CNC Electric brand |
|---|---|
| Selected operating supply | AC220V, 50/60Hz |
| Rated control duty | AC-15: 3A at AC220V |
| Thermal current Ith | 10A; not a 10A AC-15 switching rating |
| Insulation voltage Ui | AC380V |
| Programs | 16 ON settings and 16 OFF settings |
| Battery | Replaceable AA-size battery, original catalogue |
| Timing error | ≤2 seconds/day |
| Electrical / mechanical life | ≥10,000 / ≥30,000 operations |
| Operating ambient | −5°C to +40°C |
| Protection / pollution degree | IP20 / 3 |
| Dimensions | 120 × 77 × 53mm |
| Installation | DIN rail or wall mounting as shown in the original drawing |
| Load expansion | Use a suitably rated external contactor for higher loads or three-phase circuits |
Selection and installation
The AC220V unit is selected here. Other supply voltages in the shared catalogue are not offered on this page. AC-15 current, thermal current and load-specific power figures are different ratings; use the correct duty and contactor coordination rather than treating a generic wattage as universal. Follow the direct-control or contactor wiring diagram that matches the installation.
Typical applications
Scheduled lighting, advertising signs, equipment controls and higher-power or three-phase loads switched through correctly selected external contactors.
Original technical data and drawings
The following manufacturer figures retain the original technical content. Dimensions are in millimetres unless otherwise marked. Refer to the model and frame labels when using a shared family drawing.


