CNC Electric · CJX2-D2510
Product overview
The CNC Electric CJX2-D2510 is a three-pole AC contactor for switching and controlling AC motor circuits. Its AC-3 operating current is 25A at 380V. This page retains the original D2510 marking and covers the AC220V 50/60Hz control-coil configuration, with 1NO built-in auxiliary contacts.
Technical selection summary
| Original model marking | CJX2-D2510 |
|---|---|
| Common channel designation | CJX2-2510; the D marking on the original photo is retained |
| Main / auxiliary contacts | 3NO main poles + 1NO auxiliary contacts |
| AC-3 rated operating current | 25A at 380V; 18A at 660V |
| AC-4 rated current | 8.5A at 380V |
| AC-3 motor power | 5.5kW at 220V; 11kW at 380V; 15kW at 660V |
| Rated thermal current Ith | 40A |
| Rated insulation voltage Ui | 690V |
| Selected control coil | AC220V, 50/60Hz; catalogue code M7 |
| Coil operation | Pickup 85–110%Us; release 20–75%Us |
| Coil consumption | 110VA pickup; 11VA holding; 3–4W loss |
| Main conductor capacity | 4mm² |
| Standard | IEC 60947-4-1 |
| Ambient / altitude | −5°C to +40°C; altitude ≤2,000m |
| Installation conditions | Pollution degree 3; installation category III |
| Dimensions and mounting | Use the original CJX2-D25 dimension row and its corresponding drawing below |
Selection and installation
Use the D2510 contact arrangement and the AC220V 50/60Hz coil specified here. AC-3 operating current is stated at 380V and must not be confused with thermal current or with the lower AC-4 duty. Match the coil supply independently of the motor power circuit. Select overload and short-circuit protection for the actual motor and installation; a contactor alone is not a motor protective circuit breaker. Use the correct model row in the shared family drawings.
Typical applications
Motor starting and switching, machine-control panels and compatible industrial AC control circuits with coordinated overload protection.
Original technical data and drawings
The following manufacturer figures retain the original technical content. Dimensions are in millimetres unless otherwise marked. Refer to the model and frame labels when using a shared family drawing.
Download the complete original CNC CJX2-D2510 catalogue (PDF)




