XB2 22mm IP65 Waterproof Push Button Switch

Name: XB2 22mm IP65 Waterproof Push Button Switch
Brand: Newtrend or OEM brand
SKU: 60043115421

Switch Combination:1NO1NC,1NO,2NO2NC,2NO
Whether the smart:NO
Brand Name:Newtrend or OEM brand
LED:NO
Place of Origin:China
Max. Current:10A
Model Number:XB2
Max. Voltage:380V
IP level:IP65,IP54,IP67
Protection Level:IP65/IP66/IP67

SKU: 60043115421 Category: Pushbuttons

Description

XB2 Pushbutton XB2-BS542 XB2-BD21 XB2-BA31 XB2-BD53 XB2-BG73 XB2-EV164 22mm Waterproof IP65 IP67 LAY5 XB2 Push button Switch

Product Application

XB2 series push button are used in controlling circuit of AC voltage up to 660V/AC50Hz or 60Hz,and DC voltgae below 400V. It is used for controlling signal and interlocking purposes. The main body of the push buttons adopts zinc alloy and high-grade anti-flam plastic. The contact adopts special silver alloy in order to enjoy the benefit of high anti-electrical erosion. The signal lamp series are suitable for electrical appliances circuit of AC voltage up to 380V/50Hz,and DC voltage below 380V.It is ideal for using as indicating signals,warning signal,emergency signal,etc. Our products comply with GB/T14048.1 and IEC60947-5-1,all prouducts are CE,IOS9001,ROHS and UL certified.

Main technical parameter
Basic technical parameter of button			Basic technical parameter of signal lamp
Rated insulation	AC 600V(50Hz/60Hz)		Insulation resistance	≥50MΩ
Conventional heating current	10A		Contact resistance	≤25MinΩ
Insulation resistance	≥50MΩ		Pf withstand voltage	AC 2.5KV/min
Contact resistance	≤25MinΩ		Voltage wave	±20%
Mechanical life	100×10000 pushbutton	50×10000 selector switch	Brightness	60cd/m2
Electrical life	500×10000 pushbutton	25×10000 Selector switch	Continuous working life	10x10000h

Additional information

Weight	2 kg
Dimensions	25 × 25 × 25 cm
Color	Blue, Black, White, Red, Yellow, Green, Orange

Technical Datasheet & Downloads

📄 Technical Documentation & Product Specifications

Download official engineering datasheets, certified test standards (IEC / UL / CE), wiring diagrams, and dimensional drawings for XB2 22mm IP65 Waterproof Push Button Switch.

📥

Official Technical Datasheet (PDF) Complete electrical ratings, tripping characteristics, dimensions, and compliance specifications.

📐

2D/3D CAD & Dimensional Drawings STEP, DXF, and PDF CAD drawing files for panel builders and switchgear designers.

Technical FAQ & Selection Guide

💡 Frequently Asked Technical Questions & Selection Guide

Pure engineering specifications, tripping curve parameters, and electrical selection guidance for panel builders and system designers.

Voltage & Load Sizing

How to verify rated operational voltage, frequency, and load duty cycle?

Verify that the nominal line voltage (AC 230V single-phase or 400V/415V/690V three-phase at 50/60Hz, or DC voltage ratings) falls within the continuous maximum operating limits of the device. Check duty cycle ratings (continuous vs intermittent duty) to ensure thermal stability under full load.

Protection & Environment

What ingress protection (IP Rating) and environmental enclosures are recommended?

For clean indoor electrical rooms, standard IP20 modular DIN-rail housings are recommended. For outdoor, industrial washdown, or dusty environments, mount components inside weatherproof enclosures rated IP65/IP66 with UV-resistant polycarbonate or powder-coated steel enclosures equipped with compression cable glands.

Selectivity & Grading

How to ensure upstream and downstream coordination in power distribution boards?

Ensure proper discrimination by grading current thresholds and tripping time delays: upstream devices should have higher current ratings and intentional short-time delays (Class S), allowing downstream branch MCBs to clear localized faults without blacking out the entire facility.

Installation & Mounting

What mounting rails, busbars, and spatial clearances are required?

Components mount on standard symmetrical 35mm DIN rail (EN 60715 / TH35-7.5) or backplate screw fixings. Maintain recommended top/bottom ventilation gaps (typically 30–50mm) to ensure unrestricted air convection, and use standard pin/fork comb busbars to minimize contact resistance and wiring errors.

Conductor & Torque Sizing

What conductor sizes and terminal tightening torques should be applied?

Select copper or aluminum conductor cross-sections complying with IEC 60364-5-52 current-carrying capacity tables based on continuous load. Always use a calibrated torque screwdriver or torque wrench to tighten terminal screws to the manufacturer-specified torque to prevent hot-spot degradation and loose connections.