XD2PA 22mm 4 Direction Joystick Controller Switch

Name: XD2PA 22mm 4 Direction Joystick Controller Switch
Brand: Newtrend or OEM
SKU: 60691642924

illuminated Type:dot illuminated
Whether the smart:NO
Application:Industrial Control
Structure:Electromagnetic
Max. Voltage:600VAC
IP level:IP41
Terminal Type:Screw Terminal
Head Type:Rotary Head
Switch Combination:2NO
Brand Name:Newtrend or OEM
LED:NO
Material:Plastic
Place of Origin:China
Max. Current:10A
Model Number:XD2-PA14, XD2-PA24
Protection Level:IP65

Rated Voltage

Size

SKU: 60691642924 Category: Pushbuttons

Description

XD2PA24 XD2-PA24 XD2PA24CR Spring Return XD2PA14 XD2-PA14 Maintained 22mm 4NO switch 4 position 4 direction Joystick Controller

XB2 Series Joystick Switch:

Metal bezel making it ideal for severe environments

Wide range of operating temperature from -25 to +70 °C

Easy and simple installation

Ergonomic design for easy handling

Environmental performance of the product

XB4 Series Joystick Switches:

XD2PA24 XD2-PA24 XD2PA24CR Spring Return XD2PA14 XD2-PA14 Maintained 22mm 4NO switch 4 position 4 direction Joystick Controller

Additional information

Weight	0.25 kg
Dimensions	10 × 10 × 10 cm
Size	22mm
Rated Voltage	12V, 24V, 110V, 240V

Technical Datasheet & Downloads

📄 Technical Documentation & Product Specifications

Download official engineering datasheets, certified test standards (IEC / UL / CE), wiring diagrams, and dimensional drawings for XD2PA 22mm 4 Direction Joystick Controller Switch.

📥

Official Technical Datasheet (PDF) Complete electrical ratings, tripping characteristics, dimensions, and compliance specifications.

📐

2D/3D CAD & Dimensional Drawings STEP, DXF, and PDF CAD drawing files for panel builders and switchgear designers.

Technical FAQ & Selection Guide

💡 Frequently Asked Technical Questions & Selection Guide

Pure engineering specifications, tripping curve parameters, and electrical selection guidance for panel builders and system designers.

Voltage & Load Sizing

How to verify rated operational voltage, frequency, and load duty cycle?

Verify that the nominal line voltage (AC 230V single-phase or 400V/415V/690V three-phase at 50/60Hz, or DC voltage ratings) falls within the continuous maximum operating limits of the device. Check duty cycle ratings (continuous vs intermittent duty) to ensure thermal stability under full load.

Protection & Environment

What ingress protection (IP Rating) and environmental enclosures are recommended?

For clean indoor electrical rooms, standard IP20 modular DIN-rail housings are recommended. For outdoor, industrial washdown, or dusty environments, mount components inside weatherproof enclosures rated IP65/IP66 with UV-resistant polycarbonate or powder-coated steel enclosures equipped with compression cable glands.

Selectivity & Grading

How to ensure upstream and downstream coordination in power distribution boards?

Ensure proper discrimination by grading current thresholds and tripping time delays: upstream devices should have higher current ratings and intentional short-time delays (Class S), allowing downstream branch MCBs to clear localized faults without blacking out the entire facility.

Installation & Mounting

What mounting rails, busbars, and spatial clearances are required?

Components mount on standard symmetrical 35mm DIN rail (EN 60715 / TH35-7.5) or backplate screw fixings. Maintain recommended top/bottom ventilation gaps (typically 30–50mm) to ensure unrestricted air convection, and use standard pin/fork comb busbars to minimize contact resistance and wiring errors.

Conductor & Torque Sizing

What conductor sizes and terminal tightening torques should be applied?

Select copper or aluminum conductor cross-sections complying with IEC 60364-5-52 current-carrying capacity tables based on continuous load. Always use a calibrated torque screwdriver or torque wrench to tighten terminal screws to the manufacturer-specified torque to prevent hot-spot degradation and loose connections.