People Electric · Limit Switch
Product overview
People Electric JLXK1 mechanical limit switches are used in machine-tool automation for stroke limitation, movement direction and sequence control. The model diagram identifies single-wheel, double-wheel, direct-plunger and roller-plunger actuators with one normally open and one normally closed contact.
Technical selection summary
| Manufacturer / series | Original People Electric JLXK1 |
|---|---|
| Documented standard actuator models | JLXK1-111 single wheel; JLXK1-211 double wheel; JLXK1-311 direct-acting without wheel; JLXK1-411 direct-acting with wheel |
| Contacts | 1NO + 1NC as identified by the two 1 digits in the original model diagram |
| Control circuit | AC50Hz up to 380V; DC up to 220V |
| Current ratings | Source basic rating 5A; pictured product identifies Ith 5A. Match actual control-load duty separately. |
| AC380V duty table | Making current 3A; breaking current 0.3A; power factor 0.3–0.4 |
| DC220V duty table | Making/breaking current 0.12A; time constant 0.05–0.1s |
| Contact transfer time | ≤0.04s |
| Operating duty | 1,200 operations/hour; 40% duty factor, as tabulated |
| Mounting reference | Body width up to 44mm, depth up to 45mm; principal mounting centres 35 × 65mm; G1/2 cable entry. Overall head/height dimensions differ by actuator; see original drawings. |
| Sealed versions | M denotes the sealed type. The original motion-force table is specifically labelled with M models; those figures are not assumed to apply to an unconfirmed standard version. |
| Environment | Altitude ≤2,000m; -25 to +40°C; RH ≤85% at 20±5°C; no corrosive gas or conductive dust |
| Standards stated / marked | GB 14048.5; pictured product marked IEC 60947-5-1 |
This listing offers the four standard actuator models shown in the original dimensional drawings. The JLXK1-511 spring-rod photograph is excluded from this scope because its model is not in the supplied technical table. Confirm exact suffix/sealing, contact duty, actuator travel and installation dimensions with the quotation.
Typical applications
- Machine-tool stroke and end-position control.
- Direction/sequence control using the appropriate mechanical actuator.
Specify your enquiry
For a focused quotation, include:
- Required JLXK1 actuator model and whether an M sealed version is required.
- Control voltage/load, operating travel/direction and replacement label photo where applicable.
- Cable entry, mounting dimensions, quantity and destination.
Download People Electric JLXK1 catalogue (PDF)
Product reference images and drawings
