People Electric · Low-Voltage Switchgear Assembly
Product overview
People Electric BM6 Plus is a modular indoor low-voltage switchgear system for power distribution, motor control and reactive-power compensation. The manufacturer catalogue describes fixed, detachable and withdrawable functional units and illustrates component-based circuit schemes. This is an engineered assembly: its busbar rating, fault withstand, protection, separation and functional circuits must be agreed for the actual project.
Technical selection summary
| Manufacturer / system | People Electric BM6 Plus |
|---|---|
| Rated operating voltage / frequency | AC400V; 50/60Hz |
| Rated insulation / impulse withstand | AC1000V; 12kV |
| Overvoltage / pollution category | IV / 3 |
| Horizontal busbar, catalogue maximum | 4000A |
| Horizontal busbar withstand options | 50 / 65 / 85kA for 1s; corresponding peak values 105 / 143 / 187kA, subject to selected design |
| Vertical busbar, catalogue maximum | 2350A; 50 / 65kA for 1s; 105 / 143kA peak, subject to selected design |
| Earthing systems listed | TT / IT / TN-S / TN-C |
| Incoming/outgoing switching current, maximum | 4000A |
| Motor capacity, catalogue maximum | 160kW; individual circuit selection remains project-specific |
| Reactive compensation, catalogue maxima | 200kvar natural ventilation / 400kvar forced ventilation; actual stage and reactor configuration must be specified |
| Cabinet size, general table | Height 2200mm; useful height 2000mm; width 600 / 800 / 1000mm; depth 1000mm |
| Separation / enclosure options | Form2b / Form3b; IP3X / IP4X, depending on agreed assembly |
| Finish | Epoxy-resin powder electrostatic coating; standard colour RAL7035 |
| Installation conditions | Indoors; ambient −5 to +40°C; relative humidity ≤50% at 40°C; altitude ≤2000m |
| Standard reference in original catalogue | GB7251-2013. Source reference only; project conformity and tests require confirmation. |
| Component specification | The source illustrates Schneider Electric component series. Final component brands, exact devices and authorised assembly requirements must be specified; no independent licensing or certification claim is added. |
Catalogue maxima and design alternatives are not an automatically valid combination. Quote against an approved single-line diagram, load schedule and fault level. Circuit schemes and original drawings are retained below; the complete 14-page manufacturer PDF remains unchanged. Component selection and manufacturer acceptance are confirmed for the complete assembly.
Typical applications
- Indoor low-voltage power distribution.
- Motor-control centres and project-specific reactive-power compensation systems.
Specify your enquiry
For a focused quotation, include:
- Single-line diagram, load schedule, rated current, fault level and earthing system.
- Incoming/feeder devices, control voltage, metering, interlocks, component requirements and spare circuits.
- Required IP/separation, cabinet arrangement, ventilation, cable entry, installation conditions and destination.
Download People Electric BM6-PLUS catalogue (PDF)
Product reference images and drawings
