NewTrend · photovoltaic cable connections
Product overview
The Y-type wired PV branch connector pair provides a flexible one-to-two connection for compatible solar cables. Short cable sections between the single connector, moulded branch junction and two branch connectors allow more freedom of cable routing than a rigid branch body. Each set contains one positive and one negative branch assembly.
Technical selection summary
| Product type | Y-type flexible wired branch connector |
|---|---|
| Branch configuration | 1-to-2 |
| Rated voltage | 1000V DC |
| Rated current | 32A |
| Set contents | One positive and one negative branch assembly |
| Connection system | MC4-type PV cable connection |
| Contact construction | Copper contacts with tin plating |
| Ingress protection | IP67 when correctly assembled and fully mated |
| Temperature range | −40°C to +125°C |
| Dimensions | Drawing references: connector width 20mm; segment lengths 56mm, 69mm, 43mm, 53mm and 60mm. |
Branch layout and cable routing
The moulded junction joins a single cable to two branch cables. Flexible leads allow the connector ends to be positioned around the installation without loading a rigid branch body. Keep cable bends clear of the connector seals and provide suitable support and strain relief.
Connector assembly and polarity
Use the correct matching contact and connector components for the cable and connection system. Prepare the conductor, crimp the contact with an appropriate PV connector tool, fully insert the contact and secure the cable seal. Confirm polarity and complete latch engagement before energizing. A similar connector shape alone does not establish cross-brand mating compatibility. Do not disconnect a PV connector under load.
Dimensions and installation space
Drawing references: connector width 20mm; segment lengths 56mm, 69mm, 43mm, 53mm and 60mm. Allow additional space for mating connectors, cable routing and access to the locking tabs.
Environmental protection and current limits
The insulated connector bodies, contact seals and cable-entry seals provide IP67 protection when correctly assembled and mated. Keep unmated interfaces clean and dry. Copper contacts with tin plating provide the conducting connection. The common connection carries the combined branch current: size the circuit so that the total current stays within the 32A connector rating, and provide the required external circuit protection.
Typical applications
Parallel PV cable connections in compatible solar-panel installations, including rooftop arrays and connections to PV distribution equipment. Select the branch arrangement to suit the circuit topology and retain the correct polarity on both positive and negative cable runs.





