NewTrend · photovoltaic cable connections
Product overview
The T-type four-way PV branch connector pair joins four compatible solar cable branches to one common connection. Each set contains one positive and one negative branch body, with four branch ports and one common port on each body. The compact rigid construction is designed for parallel PV cable connections.
Technical selection summary
| Product type | T-type rigid four-way branch connector |
|---|---|
| Branch configuration | 1-to-4 |
| Rated voltage | 1000V DC |
| Rated current | 32A |
| Set contents | One positive and one negative branch assembly |
| Connection system | MC4-type PV cable connection |
| Contact construction | Copper contacts with tin plating |
| Ingress protection | IP67 when correctly assembled and fully mated |
| Temperature range | −40°C to +125°C |
| Dimensions | 107.5mm overall length × 76mm body width; 22mm branch-port pitch shown in the drawing. |
Branch layout and cable routing
Each rigid moulded body contains four parallel branch ports and a single common port. The complementary positive and negative bodies are supplied as a pair. Follow the moulded polarity marks and the actual circuit diagram; keep the two polarities separate throughout the connection.
Connector assembly and polarity
Use the correct matching contact and connector components for the cable and connection system. Prepare the conductor, crimp the contact with an appropriate PV connector tool, fully insert the contact and secure the cable seal. Confirm polarity and complete latch engagement before energizing. A similar connector shape alone does not establish cross-brand mating compatibility. Do not disconnect a PV connector under load.
Dimensions and installation space
107.5mm overall length × 76mm body width; 22mm branch-port pitch shown in the drawing. Allow additional space for mating connectors, cable routing and access to the locking tabs.
Environmental protection and current limits
The insulated connector bodies, contact seals and cable-entry seals provide IP67 protection when correctly assembled and mated. Keep unmated interfaces clean and dry. Copper contacts with tin plating provide the conducting connection. The common connection carries the combined branch current: size the circuit so that the total current stays within the 32A connector rating, and provide the required external circuit protection.
Typical applications
Parallel PV cable connections in compatible solar-panel installations, including rooftop arrays and connections to PV distribution equipment. Select the branch arrangement to suit the circuit topology and retain the correct polarity on both positive and negative cable runs.





