NewTrend · adjustable high-current DC supply
Product overview
The S-1000-24 is a 24V DC switching power supply in the 1000W class, with a 42A output marking. Separate voltage and current adjustment controls support load matching, while the integral fan and ventilated metal enclosure provide forced-air cooling. The illustrated unit is marked for 180–260V AC, 50/60Hz input.
Technical selection summary
| Model | S-1000-24 |
|---|---|
| DC output | 24V DC, up to 42A |
| Nominal power class | 1000W |
| AC input marking | 180–260V AC, 12A, 50/60Hz |
| Adjustment controls | Separate ADJ-V voltage and ADJ-A current controls |
| Output connections | High-current positive (+V) and negative (−V) screw terminals |
| Input connections | PE protective earth, N neutral and L line |
| Cooling | Integral fan and ventilated metal enclosure |
| Protections | Overvoltage, overload, short-circuit and overcurrent protection |
| Dimensions | 238mm long × 127mm wide × 60mm high |
| Construction | Enclosed metal case with separate AC terminal cover and output screw terminals |
Power terminals and adjustment
The high-current output terminals are labelled +V and −V. The AC terminals are arranged PE, N and L, with a separate protective cover. ADJ-V controls output-voltage adjustment and ADJ-A controls current adjustment. Keep polarity correct, bond the protective-earth terminal and select conductors and protection appropriate to the load and installation.
Fan-cooled metal construction
The metal case combines front ventilation openings with an integral cooling fan. Keep the fan inlet and exhaust openings clear and allow sufficient space for airflow around the installed supply. The power terminals remain accessible for secure cable connection, while the AC terminal cover shields the input screws. Retain all warning labels and isolate the input before servicing.
Protection and operating use
Protection functions cover overvoltage, overload, short circuit and overcurrent conditions. Set the output voltage and current to suit the connected equipment. The high-voltage warning requires the applied input to match the supply rating before power is switched on; do not remove the cover while energized.
Dimensions and mounting
The enclosure measures 238 × 127 × 60mm. Provide additional clearance for the output cables, covered AC terminals, adjustment access and fan ventilation. Use the mounting points and a suitable dry electrical enclosure for the complete installation.
Typical applications
For compatible 24V DC industrial-control, automation, instrument, communication and lighting loads within the output rating. The separate voltage and current controls are useful where the DC output must be matched to equipment requirements.



