NewTrend · three-phase motor control
Product overview
The OP700S-7R5G4L is a 7.5kW variable frequency drive for three-phase 380V motor-control systems. Its 17A output, digital keypad and adjustable-frequency functions support controlled motor starting, stopping and speed regulation. A ventilated flame-retardant housing, cooling fan and built-in protection functions suit industrial control-cabinet installation.
Technical selection summary
| Model | OP700S-7R5G4L |
|---|---|
| Rated motor power | 7.5kW |
| Rated output current | 17A |
| AC input | Three-phase 380V AC; nameplate input frequency 47–63Hz |
| AC output | Three-phase 0–380V; 0–600Hz nameplate range |
| Control functions | V/F and vector-control functions; motor-speed control |
| User interface | Removable digital keypad, speed potentiometer and run/stop keys |
| Interfaces shown | RS485, analogue inputs, digital inputs and relay output terminals |
| Cooling | Forced-air fan cooling |
| Ambient operating range | −20°C to +60°C |
| Enclosure | Flame-retardant insulating housing with ventilation slots |
| Front dimensions | 126mm wide × 246mm high |
| Enclosure depth | 174mm; 179mm overall reference including the front projection |
| Protection functions | Overcurrent, overvoltage, undervoltage, overheating, overload and power-module protection |
| Additional illustrated functions | Ground, short-circuit and phase protection; password and memory functions |
Motor-control functions
The drive provides variable-speed operation, motor protection, local settings, analogue control, RS485 communication and PID-related process functions. A memory function retains operating settings, while password protection supports controlled access to configuration.
Power and control terminals
The lower power terminals are labelled P+, PB, R, S, T, U, V, W and E. R/S/T identify the three-phase input; U/V/W are the motor output and E is protective earth. Do not connect the AC supply to U/V/W. The separate control block includes analogue and digital terminals, RS485 markings and relay-output contacts. Wire each connection according to the supplied unit and its circuit requirements.
Electrical rating and nameplate
The illustrated unit identifies a 380V input with a 47–63Hz input-frequency range, and a 0–380V, 0–600Hz output. Its rated motor-power reference is 7.5kW and rated current is 17A. Set the motor parameters to the connected motor nameplate and keep its current and speed within the equipment limits.
Protection and cooling
The protection functions cover excessive current or voltage, undervoltage, overheating, overload and power-module faults. Ground, short-circuit and phase-related protection are also illustrated. The top fan and housing vents provide forced-air cooling. Keep the airflow path unobstructed and mount in a suitable enclosure within the specified ambient range.
Control-performance references
The series control table gives the following setting and performance references. Closed-loop vector operation requires the appropriate feedback configuration; select the control mode to suit the motor and installed system.
| Frequency-setting resolution | Digital: 0.01Hz; analogue: 0.025% of maximum frequency |
|---|---|
| Control modes in the series table | Open-loop vector (SVC), closed-loop vector (FVC) and V/F |
| Starting torque reference | SVC: 150% at 0.25Hz; FVC: 180% at 0Hz |
| Speed range reference | SVC 1:200; FVC 1:1000 |
| Steady-speed accuracy | SVC ±0.5%; FVC ±0.02% |
| Torque-control accuracy | FVC ±3%; SVC ±5% above 5Hz |
| Torque boost | Automatic or manual 0.1–30.0% |
| V/F curves | Linear, multipoint, complete V/F separation and incomplete V/F separation |
| Acceleration / deceleration | Linear or S-curve; four time settings; 0.0–6500.0s |
| DC injection braking | Starting frequency: 0.00Hz to maximum; duration 0.0–36.0s; current 0–100% |
| Jog operation | 0.00–50.00Hz; acceleration/deceleration 0.0–6500.0s |
| Multistep operation | Up to 16 speed segments through built-in PLC or control terminals |
| Built-in PID | Process closed-loop control, including constant-pressure applications |
| AVR | Automatic voltage regulation |
| Current / voltage limiting | Automatic limiting to reduce excessive-current or voltage trips |
| Fast current limiting | Overcurrent-fault reduction during operation |
| Torque limiting | Torque limiting and vector-mode torque control |
Dimensions and installation
The 7.5kW housing is 126mm wide and 246mm high. The side drawing gives a 174mm enclosure depth and a 179mm overall reference including the front projection. Leave additional wiring and ventilation clearance. Isolate the supply before access; the warning label requires a discharge interval greater than five seconds and prohibits component inspection while the charge lamp remains illuminated.
Typical applications
Suitable motor-control applications include fans, pumps, woodworking, food-processing, textile, plastic, CNC and printing machinery. Select the drive by the motor voltage, current and load duty, and configure the acceleration, deceleration and speed limits for the installed machine.







