NewTrend · PV Rapid Shutdown
Product overview
FS-22 is a PLC-controlled module-level rapid shutdown device for photovoltaic rooftop and building installations. It serves two standard PV modules (≥40V) or four modules (<40V), using two input channels with a maximum input voltage of 110V per channel and 20A input current. The combined maximum input power is 4400W.
Key features
- Module-level shutdown for two standard PV modules or four lower-voltage modules.
- PLC control signalling and automatic shutdown on AC power loss.
- Automatic over-temperature shutdown at the documented 100°C threshold.
- Plug-and-play cable connections and IP68 construction.
- Panels to 0V at 30μs, as stated for the source product.
Technical selection summary
Electrical specifications
| Model | FS-22 |
|---|---|
| Maximum input voltage | 110V ×2; two input channels, not a single 220V input |
| Operating voltage range | 16–110V ×2 |
| Maximum input current | 20A |
| Maximum power, Input1 + Input2 | 4400W |
| Communication | PLC (SunSpec) |
| Shutdown response | Panels to 0V at 30μs; source stated response |
Cables and connectors
| PV input and output cables | 4.0mm² (12AWG) cables with MC4 connectors |
|---|---|
| Input1 cable length | 180mm |
| Input2 cable length | 300mm |
| Output cable length | 1800mm |
| PV connectors | Staubli MC4 standard; Jinko connectors optional, exact ordering configuration to be confirmed |
Installation and environment
| Ingress protection | IP68 |
|---|---|
| Operating temperature | −40°C to +85°C |
| Storage temperature | −40°C to +85°C |
| Over-temperature protection threshold | 100°C |
| Module connection scope | Two standard modules ≥40V, or four modules <40V |
| Transmitter compatibility | FT-01 SunSpec signal transmitter or an inverter with a built-in transmitter |
| System interaction | The source describes operation without interference with inverter AFCI |
Standards and documentation scope
| Product-page standard compliance | EN 62109-1:2010; EN 61058-1:2018 |
|---|---|
| System-level rapid shutdown references | NEC 2017 / NEC2020 690.12, when used with the specified transmitter arrangement |
| Warranty terms for supplied product | To be confirmed; source product lists 10 years |
| UL / SunSpec / NEC documentation for supplied marking | To be confirmed; the certification badges in original illustrations refer to the source-product version |
NEC rapid-shutdown performance depends on the complete listed system and transmitter arrangement. Certification documentation must match the supplied product marking. Product photographs illustrate the standard MC4 connection; an independently verified Jinko-connector photograph is not provided on the source page.
Typical applications
Module-level emergency isolation and fire-safety shutdown in photovoltaic rooftop and building systems, used with the documented compatible transmitter arrangement.
Module-level shutdown functions
FS-22 base version; the original certification and protocol symbols illustrate the source-product documentation scope.
FS-22 module wiring example
FS-22 with FT-01 transmitter; follow the shown module and transmitter connection arrangement.
FS-22 multi-module wiring example
FS-22 with FT-01 transmitter; source illustration of the four-module connection arrangement.



