DELIXI BSMJS Explosion-Proof Self-Healing Low Voltage Capacitor

Name: DELIXI BSMJS Explosion-Proof Self-Healing Low Voltage Capacitor
Brand: DELIXI
SKU: 1769739752359075840

Description

Delixi original BSMJS explosion proof Self healing Low voltage power capacitor

1.Product description

Delixi BSMJS Self-healing type power factor correction capacitor is used in an AC power system with rated voltage less than 1.2kV to increase power factor to reduce reative loss and to improve voltage quality.

2 Main Technical Parameter

Product Description	Apply to below rated voltage 1000V ,the Operating frequency is 50Hz or 60Hz AC power system in reactive power compensation, improve the power factor effectively, reduce reactive loss, improve voltage quality and load capacity of the transformer.
Certificate	CE
Standard	IEC60831-1996 GB/T12747-2004
Technical parameters	See the table below
Features	Leading Material,Polypropylene thickening the edge of Zn-Al Metallized Film
	Explosion-proof structure,pressure isolator
	The shell is tin matte Metal or Tinplate Painting
	The unit with Soft copper wire into conductive copper screw terminals
	Terminal Block is used to be black phenolic material by heating pressure
	Transparent anti-arc,dust heated use PC material by pressure injection
	Mounting brackets use waterloo interpolative Against Deduction frame,and usePC material by pressure inject

Technical Datasheet & Downloads

📄 Technical Documentation & Product Specifications

Download official engineering datasheets, certified test standards (IEC / UL / CE), wiring diagrams, and dimensional drawings for DELIXI BSMJS Explosion-Proof Self-Healing Low Voltage Capacitor.

📥

Official Technical Datasheet (PDF) Complete electrical ratings, tripping characteristics, dimensions, and compliance specifications.

📐

2D/3D CAD & Dimensional Drawings STEP, DXF, and PDF CAD drawing files for panel builders and switchgear designers.

Technical FAQ & Selection Guide

💡 Frequently Asked Technical Questions & Selection Guide

Pure engineering specifications, tripping curve parameters, and electrical selection guidance for panel builders and system designers.

Voltage & Load Sizing

How to verify rated operational voltage, frequency, and load duty cycle?

Verify that the nominal line voltage (AC 230V single-phase or 400V/415V/690V three-phase at 50/60Hz, or DC voltage ratings) falls within the continuous maximum operating limits of the device. Check duty cycle ratings (continuous vs intermittent duty) to ensure thermal stability under full load.

Protection & Environment

What ingress protection (IP Rating) and environmental enclosures are recommended?

For clean indoor electrical rooms, standard IP20 modular DIN-rail housings are recommended. For outdoor, industrial washdown, or dusty environments, mount components inside weatherproof enclosures rated IP65/IP66 with UV-resistant polycarbonate or powder-coated steel enclosures equipped with compression cable glands.

Selectivity & Grading

How to ensure upstream and downstream coordination in power distribution boards?

Ensure proper discrimination by grading current thresholds and tripping time delays: upstream devices should have higher current ratings and intentional short-time delays (Class S), allowing downstream branch MCBs to clear localized faults without blacking out the entire facility.

Installation & Mounting

What mounting rails, busbars, and spatial clearances are required?

Components mount on standard symmetrical 35mm DIN rail (EN 60715 / TH35-7.5) or backplate screw fixings. Maintain recommended top/bottom ventilation gaps (typically 30–50mm) to ensure unrestricted air convection, and use standard pin/fork comb busbars to minimize contact resistance and wiring errors.

Conductor & Torque Sizing

What conductor sizes and terminal tightening torques should be applied?

Select copper or aluminum conductor cross-sections complying with IEC 60364-5-52 current-carrying capacity tables based on continuous load. Always use a calibrated torque screwdriver or torque wrench to tighten terminal screws to the manufacturer-specified torque to prevent hot-spot degradation and loose connections.