NewTrend / OEM · DC reversing contactor
Product overview
This NewTrend / OEM reversing assembly uses paired changeover contacts to reverse a suitable DC motor circuit. Select the continuous and intermittent duty separately, and match the coil supply and terminal layout to the controller.
Technical selection summary
| Model reference | W100-T-P-DE / DC88P |
|---|---|
| Contact arrangement | Paired SPDT / double-pole changeover |
| Continuous-current reference | 100 A in the supplied model table |
| Intermittent-current reference | 400 A; allowable duration must be confirmed |
| Main-circuit reference | Up to 48 V DC in supplied data; verify actual duty |
| Listed coil choices | 12 V DC or 24 V DC; confirm full version |
An intermittent-current value is not a continuous-current rating. Confirm control interlocking, terminal numbering and motor stall current. Neither third-party interchangeability nor marine ingress protection is established by the family name.
Typical applications
- Winch motor-control assemblies
- Low-voltage DC motor reversal
- OEM equipment selected by duty
Specify your enquiry
For a focused quotation, include:
- Complete OEM model and nameplate
- Main-load voltage, current and duty
- Coil voltage, terminal arrangement and quantity
Select the available configuration and add the item to your quote list. Include the complete model and quantity for confirmation.
Related products
Product reference images and drawings
Compare the exact model, voltage and duty. Reference tables may include other frames or versions; confirm the ordered configuration before using any rating or dimension.
Model comparison
| Model |
W50-T-P-DE (DC66P) |
W100-T-P-DE (DC88P) |
| Photo |  |
 |
| Coil Voltage | 12VDC, 24VDC, 48VDC, 72VDC, etc | |
| Rated Voltage of Contact Circuit | ≤48VDC | |
| Rated Continous Current | 50A | 100A |
| Rated Intermittent Current | 200A | 400A |
| Dielectric Voltage Strength | 50Hz 1000V AC 1min | |
| Volt Drop of Main Contact | < 100mV | |
| Mechanical life | 100 thousand times | |
| Electric life | Continous 20 thousand times, Intermittent 2 thousand times | |
| Contact Form |
Double Pole, Changeover Contacts (Paired Single Pole Double Throw) |
|
| Coil Power | 25-27W | 29-31W |
| Typical Pull-In Time (N/O Contacts to Close) |
<30ms | |
| Typical Drop-Out Time (N/O Contacts to Open) |
<50ms | |
| Pull-In Voltage (Coil at 20℃) | <75%Us | |
| Drop-Out Voltage (Coil at 20℃) | 5% – 40% | |
| Main stud terminals | M8 | |
| Features |
Waterproof, Heavy load for various Winches, Windless, etc |
|
| Wiring Diagram | |
|
