NewTrend · DIN rail signal indicator
Product overview
The D9-0H combines a flashing red LED and an audible buzzer in an 18 mm DIN rail module. It signals when the monitored 220 V AC circuit is energized.
Technical selection summary
| Model | D9-0H |
|---|---|
| Rated supply | 220 V AC |
| Operating current | 20 mA |
| Visual indication | Flashing red LED |
| Audible sequence | 25 s on, 5 s pause, 25 s on |
| Enclosure rating | IP20 |
| Connecting wire | ≤6 mm² |
| Mounting | DIN rail |
| Overall dimensions | 18 mm wide × 85 mm high × 66 mm deep |
| Supply terminals | 1 and 2 |
Power-on sequence
When power is applied, the red LED flashes. The buzzer sounds for 25 seconds, pauses for 5 seconds and sounds for a further 25 seconds. After the second audible interval, the buzzer stops and the LED continues flashing while the device is powered.
Supply terminals and mounting
Terminals 1 and 2 connect to the rated AC supply. The markings on the front show the LED and buzzer connected across the same pair. The rear clip engages the mounting rail.
With the supply isolated, pull down the rail clip and tilt the module outward to remove it, as shown on the side housing.
Dimensions
Typical applications
Visible and audible power-on indication in indoor distribution boards and electrical control panels.















