NewTrend · DIN rail emergency lighting
Product overview
This rechargeable LED light switches on automatically when the mains supply fails. The assembly combines a DIN rail socket base and a detachable lamp with a two-pin plug.
Technical selection summary
| Model reference | 1 |
|---|---|
| Rated supply | 220 V AC |
| Power consumption | 5 W |
| Emergency operating time | At least 90 minutes |
| Battery | Rechargeable Ni-Cd AA, 1.2 V, 700 mAh |
| LED source voltage | 2.8–3.4 V DC |
| Mounting | 35 mm DIN rail |
| Base dimensions in drawing | 72 mm wide × 79 mm high × 67 mm deep |
| Detachable lamp dimensions in drawing | 72 × 35 × 33 mm |
Front panel indicators
The front panel has mains, fault and recharge indicators and a Test button. The source instructions show holding Test for three seconds to switch off the light.
Terminals and mounting
The base has L and N terminals at the top and bottom. Mount the base on a 35 mm DIN rail and follow the terminal markings. The detachable lamp plugs into the base and can be used with a compatible socket.
Dimensions and construction
Automatic backup lighting
After a mains outage the lamp switches on automatically. The rechargeable battery powers the LED during backup operation.



Detachable lamp and socket base
Remove the lamp to reveal the two-pin socket on the rail base. The lamp can be used separately with a compatible socket. Verify plug compatibility before use.


Test button operation
Press Test briefly to check operation. Hold it for three seconds to turn off the light when using the lamp separately.

Terminal layout and mounting
The source diagram shows both upper and lower feed orientations. Follow the L and N markings and the applicable installation instructions. The rear view shows the two rail clips.



Typical applications
Backup illumination at indoor distribution boards and control panels during a power outage.





