NewTrend · narrow DIN-rail indication
Product overview
The D9-2X and D9-3X provide clear LED indication of voltage presence in distribution boxes and control panels. The 8.5mm-wide housing saves rail space. Choose the red/green two-channel version for two separate circuits or the red/yellow/green three-channel version with a common neutral connection.
Technical selection summary
| Models | D9-2X: two channels; D9-3X: three channels |
|---|---|
| Supply / indication voltage | 230V AC/DC |
| D9-2X colours | Red and green |
| D9-3X colours | Red, yellow and green |
| Function | Visual voltage-presence indication for the connected circuits |
| Mounting | 35mm DIN rail |
| Module width | 8.5mm |
| Overall height / depth | 90mm / 66.2mm |
| Front projection / body reference | 45mm / 49.5mm; see dimension drawings |
| Connecting conductor | Up to 6mm² |
| Enclosure protection | IP20; install in an appropriate dry electrical enclosure |
| D9-2X terminals | X1–X2 and X3–X4: separate indicator circuits |
| D9-3X terminals | L1, L2, L3 and common N |
| Housing | Flame-retardant insulating enclosure; screw terminals and rail clip |
Two-channel indication and wiring
The D9-2X has red and green indicators with separate terminal pairs. Connect one monitored 230V circuit across X1–X2 and the other across X3–X4, following the printed circuit diagram. Each light indicates voltage at its own pair of terminals.
Three-channel indication and wiring
The D9-3X uses red, yellow and green indicators for L1, L2 and L3, with a common N terminal. For a three-phase four-wire installation, each indicator is connected between its phase and neutral at the rated 230V. Keep the phase-to-neutral rating distinct from phase-to-phase voltage. The front circuit symbols and the terminal positions are shown below.
Mounting and two-channel dimensions
The insulating enclosure clips onto a 35mm DIN rail. Its screw terminals accept conductors up to 6mm². The drawing identifies an 8.5mm module width, 90mm overall height and 66.2mm depth, with a 49.5mm body reference and 45mm front section. Allow space for terminal wiring and access to the release clip.
Three-channel dimensions
The D9-3X retains the same narrow mounting outline while adding a third indicator. Use the matching terminal arrangement when wiring; the two-channel and three-channel front diagrams differ.
Installation and typical applications
Suitable for voltage-status indication in household distribution boards, industrial control cabinets and machine panels. The IP20 module requires a dry protective enclosure. Isolate the circuit before installation and wire according to the terminal marks. These are visual indicators; use suitable test equipment to verify safe isolation before work. Alternative lamp-colour arrangements are version-dependent.








