CNC Electric · YCP5ME16C
Product overview
The CNC Electric YCP5ME16C/9-14A is the original photographed three-pole manual motor protector with an adjustable 9–14A current setting. It uses START/STOP controls and provides thermal overload, phase-loss and short-circuit protection as part of the YCP5 motor-protection family.
Technical selection summary
| Original complete marking | YCP5ME16C/9-14A |
|---|---|
| Adjustable current range | 9–14A; set to the motor nameplate current and applicable duty |
| Poles / operation | 3P / manual START and STOP |
| Supply terminals | 1L1, 3L2, 5L3 |
| Load terminals | 2T1, 4T2, 6T3 |
| Protection functions | Thermal overload, phase loss and short circuit; manual test function |
| Family voltage / frequency | YCP5 catalogue: AC circuits up to 690V, 50/60Hz; select the actual voltage-specific rating |
| Current-range catalogue entry | The original family table lists a 9–14A ME16 range; the photographed ME16C spelling is retained |
| Operating ambient | −5°C to +40°C; 24-hour average below +35°C |
| Altitude | ≤2,000m |
| Relative humidity | Below 90% at +25°C ±5°C |
| Pollution / installation category | 3 / III |
| Enclosure | The photographed unit is the bare device; optional protective boxes have separate IP ratings |
| Dimensions / accessories | Refer to the applicable YCP5 frame drawings and accessory table; confirm the supplied ME16C body before accessory selection |
Selection and installation
Retain the exact YCP5ME16C/9-14A marking when ordering. The shared family catalogue uses YCP5-25-ME16 for its 9–14A entry; no unsupported claim that all old/new structural suffixes or accessories are interchangeable is made. The YCP5-80 frame values do not apply. Select the actual operating voltage, short-circuit coordination and motor setting from the supplied unit instructions. This manual protector has no control coil unless a separately specified release accessory is fitted.
Typical applications
Manual starting, stopping and protection of compatible three-phase squirrel-cage motor circuits.
Original technical data and drawings
The following manufacturer figures retain the original technical content. Dimensions are in millimetres unless otherwise marked. Refer to the model and frame labels when using a shared family drawing.
Download the complete original CNC YCP5ME16C catalogue (PDF)
Download the complete original CNC YCP5ME16C instructions (PDF)


