NewTrend · HOM Series · 1 inch per Pole
Product overview
NewTrend HOM 2P plug-in thermal-magnetic circuit breakers provide overload protection, short-circuit protection and manual ON/OFF switching for residential and light-commercial branch circuits. The full-size design occupies one 1 inch module per pole in a matching HOM-type load center.
Available in the listed ratings from 15–100A, at AC 120/240V with a 10 kA interrupting capacity. Two-pole breakers use a linked operating handle for common switching and tripping.
Key features
- 2 inch module width: 50.8 mm overall width.
- Thermal-magnetic protection: Thermal response to sustained overloads and magnetic response to short circuits.
- 10 kA interrupting capacity: Rated at AC 120/240V.
- Two-pole common trip: Linked operation and automatic tripping for two-pole circuits.
- Plug-in installation: For matching HOM-type panel mounting and busbar provisions.
Technical selection summary
| Brand | NewTrend |
|---|---|
| Series | HOM |
| Product type | Plug-in thermal-magnetic circuit breaker |
| Number of poles | 2P |
| Rated current — 2P | 15, 20, 25, 30, 35, 40, 45, 50, 60, 70, 80, 90, 100A |
| Rated voltage | AC 120/240V |
| Frequency | 50/60 Hz |
| Interrupting capacity | 10 kA at AC 120/240V |
| Module width | 2 inches (50.8 mm) overall; 1 inch per pole |
| Mounting | Plug-in |
| Operation | Manual ON/OFF switching; automatic thermal-magnetic trip |
| Two-pole operation | Common trip |
| Matching load centers | HOM-type load centers with matching mounting and busbar provisions |
HOM 2P Selection Table
Dimensions — HOM
| Poles | Width | Height | Depth |
|---|---|---|---|
| 2P | 50.8 mm (2 inches) | 79.5 mm (3.13 inches) | 75.7 mm (2.98 inches) |
Approximate overall dimensions. Allow suitable terminal, conductor-bending and operating-handle clearance inside the panel.
Installation and operation
Select the pole count and rated current to suit the circuit load and conductor rating. Match the HOM breaker to the panel mounting, busbar connection and installation instructions. After a trip, clear the fault, move the handle fully to OFF, then switch to ON. Installation and servicing should be carried out by qualified personnel with the supply isolated.
Typical applications
- Residential lighting and socket branch circuits.
- Branch-circuit protection in matching HOM-type load centers.
- Light-commercial AC distribution panels.
Plug-In Connection — Rear View




