NewTrend · BR Series · 1 inch per Pole
Product overview
The NewTrend BR 2P is a full-size plug-in thermal-magnetic circuit breaker for residential and light-commercial distribution circuits. Its two-pole common-trip mechanism provides overload and short-circuit protection, with manual ON/OFF switching through a linked operating handle.
Available in 100A/125A ratings at AC 120/240V with a 10 kA interrupting capacity. The two-pole breaker occupies two 1 inch modules, giving a nominal overall width of 2 inches (50.8 mm). It is designed for matching BR-type load centers.
Key features
- 1 inch per pole: Two-pole construction occupies two modules, with a nominal overall width of 2 inches (50.8 mm).
- Thermal-magnetic protection: Thermal response to sustained overloads and magnetic response to short circuits.
- 10 kA interrupting capacity: Rated at AC 120/240V.
- Manual switching and reset: Front handle for ON/OFF operation; reset fully to OFF before switching back ON after a trip.
- BR-type plug-in mounting: Match the breaker to the load-center mounting arrangement and busbar connection.
Technical selection summary
| Brand | NewTrend |
|---|---|
| Series | BR |
| Product type | Plug-in thermal-magnetic circuit breaker |
| Number of poles | 2P |
| Rated current | 100A, 125A |
| Rated voltage | AC 120/240V |
| Frequency | 50/60 Hz |
| Interrupting capacity | 10 kA at AC 120/240V |
| Panel space | 1 inch (25.4 mm) per pole · 2 inches (50.8 mm) overall width |
| Protection | Thermal overload and magnetic short-circuit protection |
| Operation | Linked manual ON/OFF operation and common automatic trip |
| Mounting | Plug-in busbar connection |
| Matching load centers | BR-type load centers with matching mounting and busbar provisions |
BR Series Selection Table
| Product | Model | Poles | Rated Current | Rated Voltage |
|---|---|---|---|---|
BR 1P | BR110 | 1P | 10A | AC 120/240V |
| BR115 | 1P | 15A | AC 120/240V | |
| BR120 | 1P | 20A | AC 120/240V | |
| BR125 | 1P | 25A | AC 120/240V | |
| BR130 | 1P | 30A | AC 120/240V | |
| BR135 | 1P | 35A | AC 120/240V | |
| BR140 | 1P | 40A | AC 120/240V | |
| BR145 | 1P | 45A | AC 120/240V | |
| BR150 | 1P | 50A | AC 120/240V | |
| BR160 | 1P | 60A | AC 120/240V | |
| BR170 | 1P | 70A | AC 120/240V | |
BR 2P | BR210 | 2P | 10A | AC 120/240V |
| BR215 | 2P | 15A | AC 120/240V | |
| BR220 | 2P | 20A | AC 120/240V | |
| BR225 | 2P | 25A | AC 120/240V | |
| BR230 | 2P | 30A | AC 120/240V | |
| BR235 | 2P | 35A | AC 120/240V | |
| BR240 | 2P | 40A | AC 120/240V | |
| BR245 | 2P | 45A | AC 120/240V | |
| BR250 | 2P | 50A | AC 120/240V | |
| BR260 | 2P | 60A | AC 120/240V | |
| BR270 | 2P | 70A | AC 120/240V | |
| BR280 | 2P | 80A | AC 120/240V | |
| BR290 | 2P | 90A | AC 120/240V | |
| BR2100 | 2P | 100A | AC 120/240V | |
| BR2125 | 2P | 125A | AC 120/240V |
This page offers 100A and 125A two-pole models only. See the BR 1P circuit breakers for single-pole applications.
Dimensions — BR 2P
| Configuration | Width per Pole | Overall Width |
|---|---|---|
| BR 2P · 100A/125A | 1 inch (25.4 mm) | 2 inches (50.8 mm) |
Nominal module width is 1 inch per pole. Check the selected model outline and the panel installation clearances before fitting.
Installation and operation
Select the rated current to suit the circuit load and conductor rating. Match the BR breaker to the load-center mounting arrangement, busbar connection and panel instructions. Observe the terminal markings and tightening requirements. After a trip, clear the fault, move the handle fully to OFF, then switch to ON. Installation and servicing should be carried out by qualified personnel with the supply isolated.
Typical applications
- Residential lighting and socket branch circuits.
- Branch-circuit protection in matching BR-type load centers.
- Light-commercial AC distribution panels.







