NewTrend · lever-operated wire splitters
Product overview
These compact wire splitter terminals distribute incoming conductors to multiple outgoing connections. Individual color-coded levers open the spring clamps for wiring, removal and reuse. The range includes two-input and three-input layouts with copper contacts, PA housings and mounting ears.
Model selection
| Model | Connections | Voltage rating | Dimensions |
|---|---|---|---|
| SPL-42 | 2 inputs / 4 outputs | 400V | 38.9 × 22.7 × 13.5mm |
| SPL-62 | 2 inputs / 6 outputs | 400V | 38.9 × 33.5 × 13.5mm |
| C-633 | 3 inputs / 6 outputs | 250–600V | 39.3 × 33.3 × 14.4mm |
| C-933 | 3 inputs / 9 outputs | 250–600V | 39.3 × 48.3 × 14.4mm |
Technical specifications
| Rated current | 32A |
|---|---|
| Conductor cross-section | 0.08–4.0mm² |
| Conductor types | Solid, stranded and flexible copper conductors |
| Strip length | 11–13mm |
| Contact material | Copper |
| Spring material | S301 stainless steel |
| Housing material | PA |
| Ambient temperature | −40°C to +105°C |
| Withstand voltage | 4kV |
| Connection | Reusable lever-operated spring clamp |
| Mounting | M3 screw-mounting holes |
| Inspection | Test access holes; color-coded levers |
Conductor compatibility
The terminals accept solid, stranded and flexible copper conductors within the specified 0.08–4.0mm² range. Strip 11–13mm of insulation, keep the conductor strands together and insert the exposed copper fully into its terminal opening.
Reusable lever connection
Raise the lever to open the clamp, insert the stripped conductor and close the lever completely. Check that the conductor is secure with a gentle pull. Reopen the lever to release the conductor when the circuit is isolated. The connection sequence below shows the two-input and three-input forms.
Mounting and test access
The mounting ears accept M3 screws for securing the connector to a suitable support. Colored levers distinguish the connection groups, and the illustrated test holes provide access for circuit checks. Confirm the terminal grouping and conductor routing before energizing.
Two-input dimensions
The SPL-42 has two inputs and four outputs in a 38.9 × 22.7 × 13.5mm body. The SPL-62 has two inputs and six outputs, increasing the width to 33.5mm while retaining the 38.9mm length and 13.5mm height.
Three-input dimensions
The C-633 has three inputs and six outputs in a 39.3 × 33.3 × 14.4mm body. The C-933 has three inputs and nine outputs, measuring 39.3 × 48.3 × 14.4mm.
Typical applications
For lighting branches, junction-box wiring, distribution inside equipment and other installations requiring compact reusable conductor connections. Install in a suitable enclosure, isolate the circuit before rewiring and match the connector rating to the installation.
