People Electric · Explosion-Proof Cable Gland
Product overview
People Electric BTL cable glands combine a sealing arrangement and mechanical clamping for compatible cables. This page offers only the manufacturer TypeI and TypeII brass or stainless-steel constructions and the thread sizes in the table below. Cable outer diameter,inner sealing diameter and armour thickness must all fit the selected gland.
Technical selection summary
| Manufacturer / series | Original People Electric BTL |
|---|---|
| Offered structures | TypeI andTypeII,as shown in the original sectional drawings |
| Material choices | Brass orstainless steel; confirm required stainless grade/finish with the order |
| Manufacturer marking | Exd IIC Gb /DIP A20 as catalogue; verify actual supplied unit marking and applicable documents |
| Ingress protection | IP65 as catalogue |
| Selection dimensions | A=outer cable seal diameter;B=inner cable seal diameter;armour maximum,Dmaximum andexternal-thread lengthL are listed in millimetres |
| G1/2 / G15 | CableA 8–12mm;B 7–10mm;maxarmour 1.25mm;maxD 27mm;threadlengthL 16–18mm |
| G3/4 / G20 | CableA 11–16mm;B 10–15mm;maxarmour 1.25mm;maxD 34mm;threadlengthL 16–18mm |
| G1 1/4 / G32 | CableA 24–30mm;B 22–28mm;maxarmour 2.0mm;maxD 50mm;threadlengthL 18–20mm |
| G1 1/2 / G40 | CableA 30–38mm;B 27–32mm;maxarmour 2.0mm;maxD 55mm;threadlengthL 20–22mm |
| G2 / G50 | CableA 36–48mm;B 30–40mm;maxarmour 2.5mm;maxD 70mm;threadlengthL 20–22mm |
| G2 1/2 / G70 | CableA 46–64mm;B 38–58mm;maxarmour 2.5mm;maxD 85mm;threadlengthL 22–24mm |
| G3 / G80 | CableA 62–76mm;B 56–68mm;maxarmour 3.2mm;maxD 100mm;threadlengthL 22–24mm |
Only the displayed TypeI/II sizes are offered. Confirm the full gland code,material,cable construction,both sealing diameters,armour thickness,entry-thread compatibility and assembly instructions. Other BTL structures and unlisted sizes require separate confirmation. Catalogue marks are manufacturer references; verify the actual supplied assembly and applicable conformity documents.
Typical applications
- Sealing and mechanical retention of matching cables at correctly specified industrial equipment entries.
Specify your enquiry
For a focused quotation, include:
- BTL TypeI orII,material,G-thread size and quantity.
- Cable outer andinner sealing diameters,armour type/thickness and equipment-entry thread.
- Site conditions,required marking/documents,mounting accessories and destination.
Download complete People Electric hazardous-area catalogue (PDF)
Product reference images and drawings
