People Electric · RCBO
Product overview
People Electric RDX6LE-40 combines residual-current and overcurrent protection in a compact 1P+N device. The published configuration follows the exact 220V, C-curve, 30mA nameplate version and the current steps in the detailed manufacturer table.
Technical selection summary
| Manufacturer / series | Original People Electric RDX6LE-40 |
|---|---|
| Published configuration | AC220V, single-phase, 1P+N; 50/60Hz; C curve; 30mA; Type AC marking on the photographed version |
| Rated current | 6, 10, 16, 20, 25, 32, 40A |
| Residual mechanism | Electronic, according to the model identification |
| Short-circuit capacity stated | 10000A in the detailed table and Icu=10000 on the original pictured label. Confirm the exact required test duty and certificate; do not substitute an unverified Icn rating. |
| Residual operating / non-operating current | 30mA / 15mA in the detailed table |
| Nameplate residual time | t≤0.1s on the photographed 30mA version |
| Instantaneous release | C curve; detailed table gives no trip at 5In and trip at 10In within the stated test timing |
| Mounting | TH35-7.5 DIN rail; distribution box or cabinet |
| Dimensions | 36mm width; 80mm height; side drawing shows 60mm body depth plus 6mm rear projection. Confirm exact mounting clearance. |
| Environment | Altitude ≤2,000m; relative humidity ≤50% at +40°C and up to 90% at +20°C; pollution degree 2 |
| Standard stated | IEC 61009-1; photographed label states GB 16917.1 |
Only the fully identified 220V/30mA Type AC version is offered here. The broader introductory voltage/current ranges and 100/300mA mentions are not expanded into selectable configurations because the detailed table covers 6–40A/30mA. Accessories such as shunt or undervoltage releases require a separately confirmed exact code and supply.
Typical applications
- Single-phase AC220V distribution requiring combined residual-current and overcurrent protection.
- Replacement 1P+N RCBOs requiring the exact current, C curve and 30mA Type AC configuration.
Specify your enquiry
For a focused quotation, include:
- Rated current for the AC220V, 1P+N, C-curve, 30mA Type AC version.
- Actual prospective fault current, required test duty/certificate and any separately specified accessories.
- Mounting clearance, quantity and destination.
Product reference images and drawings
