SUL181d SYN161d 24-Hour Analogue Daily Program Time Switch

Name: SUL181d SYN161d 24-Hour Analogue Daily Program Time Switch
Brand: Newtrend
SKU: 1770410226990718976

Brand Name:Newtrend
Place of Origin:China
Max. Current:16A
Model Number:SUL181d SYN161d
Max. Voltage:240V
Channel:1 channel
Program:Daily Program
Operating Voltage:230-240VAC/110VAC/24VDC/12VDC
Type:96 switching segments
Mini. Interval:Shortest switching time 15 minutes
ON/OFF operation:Permanent ON/AUTO/continuous OFF

SKU: 1770410226990718976 Category: Relays

Description

SUL181d SYN161d 15min changeover contact Theben Timeguard type 96 switching segment 24 hours Daily program Analogue Time Switch

Model	SUL181h	SYN161h	SUL181d	SYN161d	SUL180a	SUL160a
Appearance
Type	DIN Rail Analogue Time Switch
Number of channels	1 Channel
Program	Daily program
Drive	Quartz-controlled stepper motor
Width	3 modules				1 modules
Power Reserve	7 days	Without	200 hours	Without	3 days	Without
Switching Segments	48 switching segments		96 switching segments
Shortest Switching Time	30 Minutes		15 Minutes
Programmable every 30 min	30 Minutes		15 Minutes
Manual switch	Permanent ON / Permanent OFF		Permanent ON / AUTO / Permanent OFF
Type of contact	Changeover contact				NO contact
Operating Voltage	220-240VAC/110VAC/24VDC/12VDC
Switching capacity at 250 V AC, cos φ = 1	16A
Switching capacity at 250 V AC, cos φ = 0,6	4A
Incandescent/Halogen Lamp Load	1100W
LED lamp < 2 W	20W
LED lamp > 2 W	180W
Ambient Temperature	-10℃~+50℃
Power Consumption	1.5VA
Dimension (mm)

Technical Datasheet & Downloads

📄 Technical Documentation & Product Specifications

Download official engineering datasheets, certified test standards (IEC / UL / CE), wiring diagrams, and dimensional drawings for SUL181d SYN161d 24-Hour Analogue Daily Program Time Switch.

📥

Official Technical Datasheet (PDF) Complete electrical ratings, tripping characteristics, dimensions, and compliance specifications.

📐

2D/3D CAD & Dimensional Drawings STEP, DXF, and PDF CAD drawing files for panel builders and switchgear designers.

Technical FAQ & Selection Guide

💡 Frequently Asked Technical Questions & Selection Guide

Pure engineering specifications, tripping curve parameters, and electrical selection guidance for panel builders and system designers.

Voltage & Load Sizing

How to verify rated operational voltage, frequency, and load duty cycle?

Verify that the nominal line voltage (AC 230V single-phase or 400V/415V/690V three-phase at 50/60Hz, or DC voltage ratings) falls within the continuous maximum operating limits of the device. Check duty cycle ratings (continuous vs intermittent duty) to ensure thermal stability under full load.

Protection & Environment

What ingress protection (IP Rating) and environmental enclosures are recommended?

For clean indoor electrical rooms, standard IP20 modular DIN-rail housings are recommended. For outdoor, industrial washdown, or dusty environments, mount components inside weatherproof enclosures rated IP65/IP66 with UV-resistant polycarbonate or powder-coated steel enclosures equipped with compression cable glands.

Selectivity & Grading

How to ensure upstream and downstream coordination in power distribution boards?

Ensure proper discrimination by grading current thresholds and tripping time delays: upstream devices should have higher current ratings and intentional short-time delays (Class S), allowing downstream branch MCBs to clear localized faults without blacking out the entire facility.

Installation & Mounting

What mounting rails, busbars, and spatial clearances are required?

Components mount on standard symmetrical 35mm DIN rail (EN 60715 / TH35-7.5) or backplate screw fixings. Maintain recommended top/bottom ventilation gaps (typically 30–50mm) to ensure unrestricted air convection, and use standard pin/fork comb busbars to minimize contact resistance and wiring errors.

Conductor & Torque Sizing

What conductor sizes and terminal tightening torques should be applied?

Select copper or aluminum conductor cross-sections complying with IEC 60364-5-52 current-carrying capacity tables based on continuous load. Always use a calibrated torque screwdriver or torque wrench to tighten terminal screws to the manufacturer-specified torque to prevent hot-spot degradation and loose connections.