Product overview
42-piece lever wire splitter kit with 18 two-input/six-output connectors and 24 two-input/four-output connectors in a single case.

Technical specifications
| Model | D2-46-204 |
|---|---|
| Pack | 42 pieces total |
| 2 IN / 6 OUT | 18 pieces |
| 2 IN / 4 OUT | 24 pieces |
| Supplier voltage rating | 300 V |
| Supplier current rating | 25 A maximum, conductor dependent |
| Standard conductor cross-section | 0.08–2.5 mm² |
| Extended cross-section | Up to 4 mm² with suitable ferrule |
| Termination | Lever-operated spring clamp |
Two splitter layouts
The two color-coded conductor paths are shown separately in the diagram. The six-output block has three outgoing positions for each input and the four-output block has two. Both layouts are included in the case.
Conductor selection
The specification lists a standard conductor cross-section of 0.08–2.5 mm². The supplier lists up to 4 mm² with a suitable ferrule as an extended condition. Confirm the conductor construction and permissible current for the installation.
Lever operation
The installation illustration shows the preparation and lever sequence. Follow the stripping-length reference for the exact connector and confirm that the conductor is fully inserted before closing the lever.








