CNC Electric · CJX2s-32
Product overview
The CNC Electric CJX2s-32 is a three-pole AC motor contactor with 32A AC-3 rating at 380/400V and built-in 1NO+1NC auxiliary contacts. This page selects a AC 380/400V 50Hz control coil and retains the exact original model photograph.
Technical selection summary
| Manufacturer model | CJX2s-32 |
|---|---|
| Main / auxiliary contacts | 3NO main poles; 1NO+1NC auxiliary |
| AC-3 current | 32A at 380/400V; 22A at 660/690V |
| AC-3 motor power | 15kW at 380/400V |
| Thermal current Ith, AC-1 | 50A |
| Selected control coil | AC 380/400V 50Hz |
| Insulation voltage Ui | 690V |
| Auxiliary contacts | Ith10A; AC-15 360VA; DC-13 33W, catalogue |
| Normal ambient / altitude | −5°C to +40°C; 24h average ≤35°C; ≤2,000m |
| Protection degree | IP20 |
| Installation | Category III; pollution degree3; DIN rail or screw |
| Standards | IEC 60947-1; IEC 60947-4-1 |
| Dimensions | Use exact CJX2s-32 row in original outline below |
Selection and installation
The original photo identifies CJX2s-32; this is CNC Electric, separate from DELIXI products sharing the CJX2s family name. AC-3 current 32A is stated at 380/400V; do not substitute the AC-1 thermal current or the lower 660/690V AC-3 current. The visible coil label on the original photo is 380/400V 50Hz, so the published selection keeps that coil rather than copying a Chilean 220V channel configuration. Use an appropriate external overload relay and upstream short-circuit protective device. A contactor alone does not provide motor overload or short-circuit protection.
Typical applications
Remote motor starting and switching in coordinated contactor/overload assemblies, ventilation, pump and industrial control panels.
Original technical data and drawings
The following manufacturer figures retain the original technical content. Dimensions are in millimetres unless otherwise marked. Refer to the model and frame labels when using a shared family drawing.
Download the complete original CNC CJX2s-32 catalogue (PDF)
Download the complete original CNC CJX2s-32 instructions (PDF)



