CNC Electric · SUL181d
Product overview
The CNC Electric SUL181d is a one-channel, quartz-controlled analogue daily time switch with 96 switching segments and a 15-minute minimum interval. It operates from 110–230V AC, 50/60Hz, with one potential-free changeover contact and rechargeable timekeeping reserve.
Technical selection summary
| Manufacturer model | SUL181d |
|---|---|
| Supply / frequency | 110–230V AC / 50–60Hz |
| Channel / program | 1 channel / daily program |
| Switching segments / interval | 96 segments / 15 minutes minimum |
| Resistive / inductive capacity | 16A at 250V AC, cosφ = 1 / 4A at 250V AC, cosφ = 0.6 |
| Incandescent / halogen load | 1,100W |
| Contact type | Potential-free, phase-independent changeover output |
| Clock reserve | Approximately 200 hours; approximately 100 hours at 110V, original catalogue |
| Battery / drive | NiMH rechargeable battery / quartz-controlled stepper motor |
| Manual switch | Continuous ON / AUTO / continuous OFF |
| Accuracy at 25°C | ≤±1 second/day |
| Standby consumption | 0.5W |
| Terminals / wire size | DuoFix spring terminals; 0.5–2.5mm² conductors |
| Protection / insulation class | IP20 / Class II |
| Operating ambient | −20°C to +55°C |
| Dimensions / mounting | 90.4mm high × 53.6mm wide × 65.6mm deep; 3 modules, DIN rail |
Selection and installation
Use the SUL181d 96-segment, 15-minute and battery-reserve configuration. SYN161d and the SUL181h 30-minute timer are different references and are not combined as interchangeable models. Timekeeping reserve varies with supply voltage and is not load backup. Wire the potential-free changeover contact and L/N supply according to the original diagram; use an external contactor when the load duty requires it.
Typical applications
Daily switching of lighting, signs and compatible control loads where 15-minute scheduling and retained timekeeping are required.
Original technical data and drawings
The following manufacturer figures retain the original technical content. Dimensions are in millimetres unless otherwise marked. Refer to the model and frame labels when using a shared family drawing.




