CNC Electric · YCISC8-32XPV E4 MC4 DC1000
Product overview
The CNC Electric YCISC8-32XPV E4 MC4 DC1000 is a lockable, non-polarized photovoltaic DC switch-disconnector for a 32A, DC1000V circuit. The external enclosure includes MC4 connection interfaces, a lockable handle and a breather valve for photovoltaic DC isolation.
Technical selection summary
| Full manufacturer ordering reference | YCISC8-32XPV E4 MC4 DC1000 |
|---|---|
| Rated operational voltage Ue | DC1000V |
| Pole / connection configuration | 4P, wiring code 4; use the four-pole series connection shown in the original diagram |
| Brand | CNC Electric |
| Rated operational current Ie | 32A at DC1000V with the specified four-pole series wiring |
| Utilization category | DC-PV1 / DC-PV2 |
| Rated insulation voltage Ui | DC1500V |
| Rated impulse withstand Uimp | 8kV |
| Rated short-time withstand Icw | 1kA for 1s |
| Catalogue short-circuit current Icn | 3kA; this switch is not an overcurrent protective circuit breaker |
| Rated short-time making capacity Icm | 1.7kA |
| Polarity | Non-polarized main circuit; retain the specified terminal-series connections |
| Mechanical / electrical endurance | 10,000 / 3000 operations |
| Arc extinguishing time | 3ms, manufacturer feature specification |
| Rigid conductor / flexible conductor | 4–16mm² / 4–10mm² |
| Terminal screws / torque | M4 / 1.2–1.8Nm |
| Stripping length | 8mm; one conductor per terminal |
| Knob screw torque | M3: 0.5–0.7Nm |
| Bottom wiring torque | 1.1–1.4Nm |
| Operating / storage temperature | −40 to +85°C; consult the original current/temperature derating graph for elevated-temperature operation |
| Pollution degree | 3 |
| Standards listed in the manufacturer catalogue | IEC/EN60947-3; AS60947.3; UL508i; listing a standard is not a separate certification claim |
| Mounting | External enclosure mounting |
| Protection degree | IP66 enclosure; original product marking IP66NW |
| Dimensions | 180×175×110mm; see the E4 MC4 drawing for connector layout |
| Connection interface | MC4 |
| External cover screw torque | ST4.2 stainless-steel screw: 1.5–2.0Nm |
Selection and installation
The original product photographs retain the CNC Electric branding and the DC1000V ordering reference. This page does not substitute the DC1200V-marked version shown on some current manufacturer web images. Use the four-pole series wiring for the selected DC1000V, 32A circuit. Reconfiguring the same contact layers into two independent loads changes the permissible current/voltage rating: do not assume 32A at 1000V for each of two independent circuits. The original current/voltage table and connection diagrams below govern the configuration. This isolator does not provide automatic overload or short-circuit protection; coordinate the circuit protection separately. Have a qualified electrician install the device with the source isolated.
Typical applications
PV string-side DC isolation; photovoltaic combiner boxes and distribution cabinets; planned isolation of compatible solar DC circuits.
Original technical data and drawings
The following manufacturer figures retain the original technical content. Dimensions are in millimetres unless otherwise marked. Refer to the model and frame labels when using a shared family drawing.
Download the complete original CNC YCISC8-32XPV E4 MC4 DC1000 catalogue (PDF)








