NewTrend · compact inline lever connectors
Product overview
The SPL-2 is a compact two-pole inline wire connector with two incoming and two outgoing conductor openings. Orange levers operate the individual spring clamps, allowing connections to be made, released and reused without twisting conductors together.
Technical specifications
| Model | SPL-2 |
|---|---|
| Connection layout | 2 inputs / 2 outputs; two-pole inline connector |
| Rated current | 32A |
| Application voltage | 250V |
| Housing voltage marking | 250V / 600V |
| Impulse voltage | 4kV |
| Conductor range | 0.08–4.0mm²; AWG28–12 |
| Conductor types | Solid and stranded copper conductors |
| Strip length | 9–10mm |
| Insulation material | Modified PA66 nylon |
| Contact material | Phosphor copper |
| Color | Grey housing with orange levers |
| Operation | Lift lever approximately 90°, insert conductor, close lever |
| Reuse | Lever-releasable and reusable |
| Dimensions | 39mm long × 13.5mm wide × 14.5mm high |
Conductor compatibility
The connector accepts solid and stranded copper conductors from 0.08 to 4.0mm², equivalent to AWG28–12. Its modified PA66 housing insulates the phosphor-copper contact system. Keep each conductor within the marked connection range.
Lever-operated wiring
Isolate the circuit, strip 9–10mm of insulation and lift the orange lever approximately 90°. Insert the exposed copper fully into the opening, then close the lever. Check that the wire is held securely and no bare conductor remains outside the housing. To disconnect, isolate the circuit and reverse the sequence.
Inline two-pole connection
The opposed conductor openings provide a compact two-pole inline connection. Match the two conductor paths consistently and check the underside L and N markings when wiring phase and neutral conductors. The illustrated connection is rated 32A at 250V.
Dimensions
The connector measures 39mm long, 13.5mm wide and 14.5mm high. Allow additional clearance for opening the levers and routing the conductors without strain.
Typical applications
For compact conductor joining in lighting circuits, junction boxes, appliances and control equipment. Install inside a suitable enclosure and provide circuit protection appropriate to the connected conductors and load.
