IP65 LED Triproof Fluorescent T8 Light Fixture 60-150cm

Description

ABS PC material Triproof Light Fixture 60cm 120cm 150cm IP65 Single Double LED Fluorescent T8 Tube Waterproof Light Fixture

Model	Power	Lamp	IP Rating	Size LxWxH (mm)	Carton Size (mm)	PCS/CTN
NTC-118/F	1x18W	T8 Fluorescent Tube	IP65	665x91x85	695x300x395	12
NTC-136/F	1x36W	T8 Fluorescent Tube	IP65	1270x91x85	1290x210x280	8
NTC-158/F	1x58W	T8 Fluorescent Tube	IP65	1588x91x85	1600x210x280	8
NTC-218/F	2x18W	T8 Fluorescent Tube	IP65	665x132x85	695x280x395	6
NTC-236/F	2x36W	T8 Fluorescent Tube	IP65	1265x132x85	1290x180x215	6
NTC-258/F	2x58W	T8 Fluorescent Tube	IP65	1686x132x85	1600x180x215	6

Technical Datasheet & Downloads

📄 Technical Documentation & Product Specifications

Download official engineering datasheets, certified test standards (IEC / UL / CE), wiring diagrams, and dimensional drawings for IP65 LED Triproof Fluorescent T8 Light Fixture 60-150cm.

📥

Official Technical Datasheet (PDF) Complete electrical ratings, tripping characteristics, dimensions, and compliance specifications.

📐

2D/3D CAD & Dimensional Drawings STEP, DXF, and PDF CAD drawing files for panel builders and switchgear designers.

Technical FAQ & Selection Guide

💡 Frequently Asked Technical Questions & Selection Guide

Pure engineering specifications, tripping curve parameters, and electrical selection guidance for panel builders and system designers.

Voltage & Load Sizing

How to verify rated operational voltage, frequency, and load duty cycle?

Verify that the nominal line voltage (AC 230V single-phase or 400V/415V/690V three-phase at 50/60Hz, or DC voltage ratings) falls within the continuous maximum operating limits of the device. Check duty cycle ratings (continuous vs intermittent duty) to ensure thermal stability under full load.

Protection & Environment

What ingress protection (IP Rating) and environmental enclosures are recommended?

For clean indoor electrical rooms, standard IP20 modular DIN-rail housings are recommended. For outdoor, industrial washdown, or dusty environments, mount components inside weatherproof enclosures rated IP65/IP66 with UV-resistant polycarbonate or powder-coated steel enclosures equipped with compression cable glands.

Selectivity & Grading

How to ensure upstream and downstream coordination in power distribution boards?

Ensure proper discrimination by grading current thresholds and tripping time delays: upstream devices should have higher current ratings and intentional short-time delays (Class S), allowing downstream branch MCBs to clear localized faults without blacking out the entire facility.

Installation & Mounting

What mounting rails, busbars, and spatial clearances are required?

Components mount on standard symmetrical 35mm DIN rail (EN 60715 / TH35-7.5) or backplate screw fixings. Maintain recommended top/bottom ventilation gaps (typically 30–50mm) to ensure unrestricted air convection, and use standard pin/fork comb busbars to minimize contact resistance and wiring errors.

Conductor & Torque Sizing

What conductor sizes and terminal tightening torques should be applied?

Select copper or aluminum conductor cross-sections complying with IEC 60364-5-52 current-carrying capacity tables based on continuous load. Always use a calibrated torque screwdriver or torque wrench to tighten terminal screws to the manufacturer-specified torque to prevent hot-spot degradation and loose connections.