Type BR 1-Pole Plug-On Circuit Breaker 10A-60A

Name: Type BR 1-Pole Plug-On Circuit Breaker 10A-60A
Brand: Newtrend or OEM brand
SKU: 1600931654588

Rated Frequency:50/60hz
Mounting type:plug-in mount
Type:Mini
BCD Curve:C
Brand Name:Newtrend or OEM brand
Application:Household
Material:Plastic
Place of Origin:China
Model Number:BR
Poles Number:1
Breaking Capacity:6kA

Poles

Rated Current

Rated Voltage

Description

Type BR BR110 BR115 BR120 BR125 BR130 BR140 BR150 BR160 BR170 1 Pole 10 20 30 40 50 60 Amp Plug on Type BR Circuit Breaker

Type BR Circuit Breakers
– Operated by toggle-type handle and multi-pole circuit breakers have an internal common trip mechanism.

– Handle position provides visual trip position.

– Type BR:

10 to 125 amperes

1 pole, 2 pole and 3 pole

1 pole, 2 pole: 120/240 V

3 pole: 240 V

10 kAIC

– Type BR breakers carry listing for HCAR application.

– 1-inch (25.4 mm) wide (per pole).

Type BR Plug-on Circuit Breakers
	Ampere Rating	Catalog Number
	Ampere Rating	Single-Pole 120/240 Vac	Two-Pole 120/240 Vac	Three-Pole 240 Vac
	10A	BR110	BR210	BR310
	15A	BR115	BR215	BR315
	20A	BR120	BR220	BR320
	25A	BR125	BR225	BR325
	30A	BR130	BR230	BR330
	35A	BR135	BR235	BR335
	40A	BR140	BR240	BR340
	45A	BR145	BR245	BR345
	50A	BR150	BR250	BR350
	60A	BR160	BR260	BR360
	70A	BR170	BR270	BR370
	80A		BR280	BR380
	90A		BR290	BR390
	100A		BR2100	BR3100
	125A		BR2125

Additional information

Weight	0.15 kg
Dimensions	10 × 10 × 10 cm
Rated Current	60A, 25A, 20A, 15A, 35A, 50A, 10A, 30A, 40A
Rated Voltage	120V/240V
Poles	1P

Technical Datasheet & Downloads

📄 Technical Documentation & Product Specifications

Download official engineering datasheets, certified test standards (IEC / UL / CE), wiring diagrams, and dimensional drawings for Type BR 1-Pole Plug-On Circuit Breaker 10A-60A.

📥

Official Technical Datasheet (PDF) Complete electrical ratings, tripping characteristics, dimensions, and compliance specifications.

📐

2D/3D CAD & Dimensional Drawings STEP, DXF, and PDF CAD drawing files for panel builders and switchgear designers.

Technical FAQ & Selection Guide

💡 Frequently Asked Technical Questions & Selection Guide

Pure engineering specifications, tripping curve parameters, and electrical selection guidance for panel builders and system designers.

Voltage & Load Sizing

How to verify rated operational voltage, frequency, and load duty cycle?

Verify that the nominal line voltage (AC 230V single-phase or 400V/415V/690V three-phase at 50/60Hz, or DC voltage ratings) falls within the continuous maximum operating limits of the device. Check duty cycle ratings (continuous vs intermittent duty) to ensure thermal stability under full load.

Protection & Environment

What ingress protection (IP Rating) and environmental enclosures are recommended?

For clean indoor electrical rooms, standard IP20 modular DIN-rail housings are recommended. For outdoor, industrial washdown, or dusty environments, mount components inside weatherproof enclosures rated IP65/IP66 with UV-resistant polycarbonate or powder-coated steel enclosures equipped with compression cable glands.

Selectivity & Grading

How to ensure upstream and downstream coordination in power distribution boards?

Ensure proper discrimination by grading current thresholds and tripping time delays: upstream devices should have higher current ratings and intentional short-time delays (Class S), allowing downstream branch MCBs to clear localized faults without blacking out the entire facility.

Installation & Mounting

What mounting rails, busbars, and spatial clearances are required?

Components mount on standard symmetrical 35mm DIN rail (EN 60715 / TH35-7.5) or backplate screw fixings. Maintain recommended top/bottom ventilation gaps (typically 30–50mm) to ensure unrestricted air convection, and use standard pin/fork comb busbars to minimize contact resistance and wiring errors.

Conductor & Torque Sizing

What conductor sizes and terminal tightening torques should be applied?

Select copper or aluminum conductor cross-sections complying with IEC 60364-5-52 current-carrying capacity tables based on continuous load. Always use a calibrated torque screwdriver or torque wrench to tighten terminal screws to the manufacturer-specified torque to prevent hot-spot degradation and loose connections.