XB4BP 22mm Silicone Booted Spring Return Button

Name: XB4BP 22mm Silicone Booted Spring Return Button
Brand: NewTrend
SKU: 1600123423408

illuminated Type:dot illuminated
Whether the smart:NO
Application:Industrial Control
Structure:Electromagnetic
Max. Voltage:12V ,24V,110V,220V,240V,230V,380V
IP level:IP41
Terminal Type:Screw Terminal
Head Type:Round Head
Switch Combination:other
Brand Name:NewTrend
LED:NO
Material:Plastic
Place of Origin:China
Max. Current:10A
Model Number:XB4BP

Rated Voltage

Size

SKU: 1600123423408 Category: Pushbuttons

Weight	2 kg
Dimensions	25 × 25 × 25 cm
Size	22mm
Rated Voltage	12V, 24V, 110V, 240V

Weight

2 kg

Dimensions

25 × 25 × 25 cm

Size

22mm

Rated Voltage

12V, 24V, 110V, 240V

📄 Technical Documentation & Product Specifications

Download official engineering datasheets, certified test standards (IEC / UL / CE), wiring diagrams, and dimensional drawings for XB4BP 22mm Silicone Booted Spring Return Button.

📥

Official Technical Datasheet (PDF) Complete electrical ratings, tripping characteristics, dimensions, and compliance specifications.

📐

2D/3D CAD & Dimensional Drawings STEP, DXF, and PDF CAD drawing files for panel builders and switchgear designers.

💡 Frequently Asked Technical Questions & Selection Guide

Pure engineering specifications, tripping curve parameters, and electrical selection guidance for panel builders and system designers.

Voltage & Load Sizing

How to verify rated operational voltage, frequency, and load duty cycle?

Verify that the nominal line voltage (AC 230V single-phase or 400V/415V/690V three-phase at 50/60Hz, or DC voltage ratings) falls within the continuous maximum operating limits of the device. Check duty cycle ratings (continuous vs intermittent duty) to ensure thermal stability under full load.

Protection & Environment

What ingress protection (IP Rating) and environmental enclosures are recommended?

For clean indoor electrical rooms, standard IP20 modular DIN-rail housings are recommended. For outdoor, industrial washdown, or dusty environments, mount components inside weatherproof enclosures rated IP65/IP66 with UV-resistant polycarbonate or powder-coated steel enclosures equipped with compression cable glands.

Selectivity & Grading

How to ensure upstream and downstream coordination in power distribution boards?

Ensure proper discrimination by grading current thresholds and tripping time delays: upstream devices should have higher current ratings and intentional short-time delays (Class S), allowing downstream branch MCBs to clear localized faults without blacking out the entire facility.

Installation & Mounting

What mounting rails, busbars, and spatial clearances are required?

Components mount on standard symmetrical 35mm DIN rail (EN 60715 / TH35-7.5) or backplate screw fixings. Maintain recommended top/bottom ventilation gaps (typically 30–50mm) to ensure unrestricted air convection, and use standard pin/fork comb busbars to minimize contact resistance and wiring errors.

Conductor & Torque Sizing

What conductor sizes and terminal tightening torques should be applied?

Select copper or aluminum conductor cross-sections complying with IEC 60364-5-52 current-carrying capacity tables based on continuous load. Always use a calibrated torque screwdriver or torque wrench to tighten terminal screws to the manufacturer-specified torque to prevent hot-spot degradation and loose connections.