CHINT · NJBK7
Product overview
CHINT NJBK7 motor protectors monitor motor operation and faults, with RS485 and 4–20 mA functions available by suffix. T denotes the RS485 interface and M denotes analog transmission; specify these options explicitly when integrating a motor into a monitoring system.
Technical selection summary
| Series | NJBK7 |
|---|---|
| Catalogue current coverage | 1–800 A, model and sensor dependent |
| Protection functions | Overload, blocking, phase loss, unbalance, undercurrent, earthing and PTC functions |
| Communication code | T: RS485 |
| Analog output code | M: 4–20 mA |
| System arrangement | Normally used with an AC contactor |
| Manufacturer model-code reference | NJBK7-800 catalogue family, with separate current specifications and M/T interface suffixes; the 800 designation does not make every selection an 800 A setting |
| Manufacturer enclosure-protection reference | The CHINT NJBK7 catalogue lists IP20 as enclosure protection class (where applicable) for the NJBK7-800 family current-specification entries in its technical table. Match the complete model and installed enclosure arrangement |
| Overload operating-principle reference | The manufacturer describes an inverse-time overload function that calculates motor thermal accumulation from overload current and operates the contactor when the thermal threshold is reached. Motor-current sensing, protection calculation and output contacts are separate functions |
Typical applications
- Motor control centres
- Networked pump and fan monitoring
- Industrial motor protection








