CNC Electric · CJX2-D5011
Product overview
The CNC Electric CJX2-D5011 is a three-pole AC contactor for switching and controlling AC motor circuits. Its AC-3 operating current is 50A at 380V. This page retains the original D5011 marking and covers the AC220V 50/60Hz control-coil configuration, with 1NO+1NC built-in auxiliary contacts.
Technical selection summary
| Original model marking | CJX2-D5011 |
|---|---|
| Common channel designation | CJX2-5011; the D marking on the original photo is retained |
| Main / auxiliary contacts | 3NO main poles + 1NO+1NC auxiliary contacts |
| AC-3 rated operating current | 50A at 380V; 39A at 660V |
| AC-4 rated current | 24A at 380V |
| AC-3 motor power | 15kW at 220V; 22kW at 380V; 33kW at 660V |
| Rated thermal current Ith | 80A |
| Rated insulation voltage Ui | 690V |
| Selected control coil | AC220V, 50/60Hz; catalogue code M7 |
| Coil operation | Pickup 85–110%Us; release 20–75%Us |
| Coil consumption | 200VA pickup; 20VA holding; 6–10W loss |
| Main conductor capacity | 25mm² |
| Standard | IEC 60947-4-1 |
| Ambient / altitude | −5°C to +40°C; altitude ≤2,000m |
| Installation conditions | Pollution degree 3; installation category III |
| Dimensions and mounting | Use the original CJX2-D50 dimension row and its corresponding drawing below |
Selection and installation
Use the D5011 contact arrangement and the AC220V 50/60Hz coil specified here. AC-3 operating current is stated at 380V and must not be confused with thermal current or with the lower AC-4 duty. Match the coil supply independently of the motor power circuit. Select overload and short-circuit protection for the actual motor and installation; a contactor alone is not a motor protective circuit breaker. Use the correct model row in the shared family drawings.
Typical applications
Motor starting and switching, machine-control panels and compatible industrial AC control circuits with coordinated overload protection.
Original technical data and drawings
The following manufacturer figures retain the original technical content. Dimensions are in millimetres unless otherwise marked. Refer to the model and frame labels when using a shared family drawing.
Download the complete original CNC CJX2-D5011 catalogue (PDF)




